RC servo conversion to 3 or 6 full revolutions
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Watch video to see what it's all about. https://www.youtube.com/watch?v=-sE24omGRQU
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 15
- Makes
- 0
- Views
- 370
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
I have modified servo's for years by using remote pots. This modification allows you to turn a servo from 180 degree's motion to 3 or 6 revolutions.
This is designed to modify a MG995 which are about $6. The little extension was printed on my Prusa MK3+ in .1 quality and it worked better than I expected. I found that if I print it without the flats I get a great print and then I file down the necessary flats. I supplied both stl files, you might have better luck than me and maybe you have a resin printer that should work well.
I used a Vishay 536B103 for 6 turns and a 536B502 for 3 turns.
Watch the video for details
Cheers
Kisssys