RC servo conversion to 3 or 6 full revolutions
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Watch video to see what it's all about. https://www.youtube.com/watch?v=-sE24omGRQU
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 370
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
I have modified servo's for years by using remote pots. This modification allows you to turn a servo from 180 degree's motion to 3 or 6 revolutions.
This is designed to modify a MG995 which are about $6. The little extension was printed on my Prusa MK3+ in .1 quality and it worked better than I expected. I found that if I print it without the flats I get a great print and then I file down the necessary flats. I supplied both stl files, you might have better luck than me and maybe you have a resin printer that should work well.
I used a Vishay 536B103 for 6 turns and a 536B502 for 3 turns.
Watch the video for details
Cheers
Kisssys