1 / 1
10" 1U 3 x SBC (Raspberry Pi 3, Raspberry Pi 4, Raspberry Pi 5, Orange Pi 3B) — image 1

10" 1U 3 x SBC (Raspberry Pi 3, Raspberry Pi 4, Raspberry Pi 5, Orange Pi 3B)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Fit 3 SBCs in 1U 10" rack space. Made to handle Orange Pi 3B with NVMe drive underneath. But will also fit Raspberry Pi

Rating
0 / 5
Likes
0
Downloads
31
Makes
0
Views
251
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial

I was inspired by other solutions here, but I thought I could do something similar, but better :)

Whats unique with my design:

  • Designed for printing without overhangs or support
  • Designed for heat-inserts (voron style)
  • All three face plates are the sameI was inspired by other solutions here, but I thought I could do something similar, but better :)

Whats unique with my design:

  • Designed for printing without overhangs or support
  • Designed for heat-inserts (voron style)
  • All three face plates are the same

Tips & Trix

If using Rpi PoE-hat, you should probably screw in the board with 2.5x9 standoffs

If USB power connector is interfering with the next SBC, flip the middle SBC upside down, they are symmetric like that. 

Printing

No supports, resolution doesn't matter, I did 0.2 for holders and 0.3 for plate

Print 3 sbc-holders of your choice, they are needed for stability.

Print the 10" plate

Hardware for full rack

  • 6x inserts, M3 x 5 x 4mmM3 x 5 x 4mm (Voron style)
    For the plate to be able to hold holders
  • 6x M3x6 (or 8, 10, whatever, countersunk preferred)
    To screw the holders to the plate
  • 6x M2.5x6 (or 8, 10, whatever)
    To screw the SBCs to the holders

Tags