1 / 6
The Patriot- enclosure for Heltec v3
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a enclosure for Heltec v3 (for Meshtastic and MeshCore or any other system that uses this module).
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 78
- Makes
- 0
- Views
- 1,054
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial
Required items:
- Power switch: Mini spst slide switch with handle lenght of at least 4mm
- Heat insert nut: M3 (4mm long/ 4.5mm wide)
- Screw: M3 (10mm long)
- UV resin (optional): for glueing in the power switch
- Recommended battery: 104050 2500 mAh LIPO
- EVA self stick foam, 3mm thick: stick it to the back cover for fixation off the pcb.
- I recomend printing it from PETG if you plan on using it outside or in a hot car.
Changelog:
- 2025/20/10 - changed antenna position a bit (body v1.1), added option of a body without power switch