Replacement Cup / Lid for Tramp TRC-028 Thermos – 3D Printable Model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A fully functional replacement cup/lid designed for the Tramp TRC-028 thermos. Accurately modeled, 3D-printable part wit
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 17
- Makes
- 0
- Views
- 80
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a replacement cup/lid designed to perfectly fit the Tramp TRC-028 thermos.
The model replicates the original geometry and thread, ensuring a snug, leak-free fit. Perfect if your original cup is lost, damaged, or if you simply want a spare in a custom color.
The design has been tested on Elegoo Centauri Carbon and Voron Switchwire (CoreXZ) printers using eSUN ePETG-Lite and standard PETG filament.
Fully compatible with Tramp TRC-028 thermos
Internal thread matches the original perfectly
Reinforced wall structure for extra durability
Smooth and uniform outer surface with clean seam alignment
Can be printed in different materials and colors
Verified for fit and overall usability
🧠 Recommended Print Settings:
Material: PETG or ePETG-Lite
Nozzle: 0.4 mm Layer height: 0.20 mm
Nozzle temp: 235–240 °C
Bed temp: 75–80 °C (reduce to 72 °C after a few layers)
Cooling fan: 50 % after layer 2–3
Outer wall speed: 30–35 mm/s
Flow rate: 0.95–0.98
Z-Seam: Aligned / Rear / Hide seam
Retraction (direct): 0.8–1.0 mm @ 40 mm/s
Bridges: 22–25 mm/s, fan 90 %, bridge flow 0.95
