Ender 3 V3 KE Larger Filament Support
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easier to print, larger gear bearing with a gentler curve for filament.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 44
- Makes
- 0
- Views
- 213
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution
I really liked Oleksandr's remix of the much-remixed filament guide, but it's hard to print the bearing and goose neck without excellent calibration, and I wanted to give filament a gentler curve over the top of the gantry.
I scaled the goose + gear pulley to 120%, then modified the base to have a 20% taller/larger upright, while keeping the dimensions of the base the same so the gantry mount still works.
Printed the parts as oriented with PLA, I used 40% infill so they'd be rigid but presumably anything would work fine. the base could use supports but I printed it without them and the stringing on the overhang actually helped grip the center of the gear pulley when assembled.
I suggest printing the gear with ~.1-.16mm layer lines so the gears are more accurate, the other parts can be .2mm or higher.