1 / 6
EdgeSet PRO – the smart 4-way spacer for flawless floors — image 1
1 / 6

EdgeSet PRO – the smart 4-way spacer for flawless floors

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The best flooring spacer! No more guessing gaps – just flip for the perfect fit!

Rating
5 / 5
Likes
6
Downloads
147
Makes
1
Views
348
Reviews
1

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution

EdgeSet PRO – the smart 4-way spacer for flawless floors

Achieve perfect flooring results with EdgeSet PRO, the all-in-one smart spacer designed to make floor installation easier, faster, and more precise than ever.

Unlike conventional spacers from hardware stores or other 3D models, EdgeSet PRO combines four different gap sizes (4 mm, 6 mm, 8 mm, and 10 mm) in a single compact tool. Simply rotate the spacer to select the desired distance — no need to carry multiple parts or guess which one fits best.

This makes EdgeSet PRO the ultimate companion for any flooring project, whether you’re working with vinyl, laminate, or parquet, and especially useful when you’re unsure which expansion gap will be needed in advance, or you’re dealing with uneven or non-straight walls that require different spacings for alignment.

Each side of the spacer is clearly labeled with its corresponding gap size, both on the edge and on the top surface. That means you can instantly recognize which side is currently in use — even while the spacer is already positioned in the expansion joint. This thoughtful feature not only adds comfort and clarity, but also significantly boosts productivity on the job site.

Each EdgeSet PRO uses just around 5 grams of filament, making it lightweight, economical, and perfect for batch printing.

Printing:
There are two versions available, one for 5 mm thick boards and one for 8 mm. Although you can use the 5 mm version for ANY thickness, the 8 mm one stays in place a bit better on thicker boards. Print the model with the flat side facing the printbed. PLA with standard setting works fine even when you have to “persuade” the boards with a mallet. I've had good results with a 0.4 mm nozzle and 0.2 mm layer height (for maximum readability of the small text print with a 0.2 mm nozzle).

Please post a MAKE if you print this model and let me know if the design needs any adjustments :)

 

Tags