1 / 2
Luhlee Solar light mounting for Colourbond fences — image 1
1 / 2

Luhlee Solar light mounting for Colourbond fences

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Great for renters, this allows you to put the lighting on the top of a Colourbond fence and is easily removable

Rating
0 / 5
Likes
2
Downloads
12
Makes
0
Views
86
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

This was created to allow the LUHLEE solar lights (https://amzn.asia/d/fqM8V5s) to clip securely to a Colourbond fence, without needing to drill holes in the fence. That is easily removable.

It uses the screws that come with the lights to attach the lights to the bracket. The light can be removed or replaced without taking the bracket off the fence.

Print this in ABS - because ABS stands the UV light, heat, etc better than most materials

NOTE: Updated recommended material from PETG to ABS because Aussie summers are not friendly to PETG 😒. Outside in the sun reaches close enough to the glass point of PETG to make it deform. Also adjusted the screw holes to stop it splitting.

It requires very little infill, so you can use lightening infill. 

This was printed with a 0.6mm nozzle, 2 wall loops, 4 top and bottom layers

Recommend increasing the Wall loops and top/bottom layers if using a smaller nozzle

Tags