ESPHome Transit E-Paper Display Housing (Multi-Part Assembly)

This multi-part housing system enables you to build a sleek transit display showing real-time public transport departures using ESPHome and Home Assistant. Perfect for keeping track of your daily commute or public transport connections at a glance.

🧩 Parts & Assembly:This model consists of multiple parts that need to be assembled with super glue. The precise fit requires careful alignment during assembly.

⚙ Print Requirements: CRITICAL: Must be printed with a 0.25mm nozzle for proper fit and detail

• Standard layer height recommended
• Small (auto) supports needed for most parts
• PLA or PETG recommended

🔧 Hardware Required:

• ESP32 (check GitHub to see which model)
• E-Paper display (check GitHub to see which model)
• Super glue for assembly

📡 Software Setup:

The complete ESPHome configuration and Home Assistant integration is available on GitHub: https://github.com/gregor-autischer/ESPHome-Transit-Epaper

The repository includes ready-to-use YAML configurations for displaying public transport data from various European transit APIs.

🔨 Assembly Instructions:

1. Print all parts with a 0.25mm nozzle
2. Test-fit all components before gluing
3. Insert the e-paper display and ESP board
4. Carefully apply super glue to the joining surfaces
5. Hold parts firmly until the glue sets
6. Flash your ESP with the provided ESPHome configuration
7. Mount and enjoy real-time transit information!

💡 Use Cases:

• Hallway departure board
• Office desk display
• Smart home integration
• Public transport monitoring

📺 More smart home projects on my YouTube channel