1 / 6
FilamentPass-Connector
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A screw to bring your filament into your 3D printer housing without exposing it to the surrounding air.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 38
- Makes
- 0
- Views
- 143
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted something to guide my filament into my IKEA BESTÅ 3D Printer housing without exposing it to the surrounding air and came up with this screw.
I printed it in PLA with .4 nozzle and 0.08 layer height. No supports needed.
The screw takes two standard PC4-M10 PTFE Tube Push In connectors.
Maximum width of the cabinet can be up to 35mm, minimum is 10mm, but you can add some sort of ring without a thread to reduce the minimum width.
You need to drill a hole of at least 15 mm.