1 / 4
Cartoon Style Flames
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two different style of flames that have a hole in the bottom of it to glue in a 3mm LED.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 46
- Makes
- 0
- Views
- 96
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Cosplay & Costumes in general
- License
- Creative Commons — Public Domain
Two styles of cartoon-like flames were 3D-printed from clear PETG on a Prusa Mini, using a 0.10mm layer height. There is a clearance hole in the bottom of the flame boarder to fit a 3mm yellow, flickering LED which is secured with hot glue from the underside. Four of these LED-equipped flames were wired in parallel to a 9-volt battery, which provided power for the "burning" effect on a custom "burning building" costume throughout the night.