Print Friendly Curved Analemma Vertical Plate for 3DMason Heliochronometers - Southern Hemisphere
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.14 – €0.17 net (excluding VAT)
For file: analemma_inside_curve_0.4n_0.15mm_PETG_MK4S_12m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.15 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 12 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A printer friendly analemma curve which doesn't require any messy post-processing / painting to highlight the curve.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 7
- Makes
- 0
- Views
- 39
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Compatible for the southern hemisphere only. For the northern-hemisphere version, check here for the correct parts: Print Friendly Curved Analemma Vertical Plate for 3DMason Heliochronometers by 3DMason | Download free STL model | Printables.com
Please note that the photos only show the northern-hemisphere parts. The southern hemisphere parts are flipped 180 deg like the image given below:

No post-processing required with this version to highlight the analemma curve on the vertical plate. Previous designs required painting with Markal B Paintstik Paint Pencil, etc.
In this new design, the outer portion of the analemma curve resides on the vertical arm & the interior of the curve i.e., large & small teardrops, is installed on a separate dark background part, which provides the required contrast. This assembly is then installed onto the vertical arm, ready for installation onto your existing alidade. Make sure you are also using the larger curved nodus design with this new analemma design. See photos for assembly details. Parts may require a small amount of glue if they don't remain in place.
This new analemma design is compatible with all the following heliochronometer models by 3DMason: