Japanese Wrapping Cloths - Furoshiki Patchin and Rings (風呂敷パチン)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Instantly transform any cloth into a personal, minimalist bag straight out of Japan’s historic wrapping tradition!
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 17
- Makes
- 0
- Views
- 111
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution
Furoshiki Patchin and Rings (風呂敷パチン)
While furoshiki are often used without accessories, these models can elevate and modernize your experience!
Patchin (パチン)
Patchin are accessories designed to add a magnetic closure to your bag while simultaneously streamlining the handle's appearance.
Two sizes are offered. The regular size is suitable for furoshiki ranging from 120-70cm, while the mini size is aimed at 70-45cm square furoshiki.
Rings
Rings provide a different appearance to a furoshiki bag by both changing the shape and drawing the eye towards the contrasting appearance of the handle.
What is a Furoshiki (風呂敷)?
A furoshiki is a traditional Japanese square cloth used for wrapping, carrying, and presenting any kind of everyday item. These can be found in a wide variety of sizes and materials, from small silken squares for presenting engagement rings to large, heavy-duty blankets more at home on a picnic.
Since a furoshiki is a square piece of fabric, you can substitute nearly any textile. Whether a scarf, repurposed bedsheet, or thrift-store find, as long as it’s roughly square, a material you’re comfortable folding and has a design you love, it can become your personal furoshiki.
This project is currently best used with furoshiki in the 120-45cm range, which produce bags with sizes ranging from a large grocery bag to a smaller purse.
More information on furoshiki is broadly available:
How do I use these?
Rings (Video Link):
- Lay your furoshiki face-up on a flat surface and place the Ring flat, at the center of an edge
- Pull the two corners of the edge through the top of the ring to the underside
- Take the two corners and tie them together around the top of the ring.
The result should capture the ring in the furoshiki while the knot cinches the fabric together. - Repeat steps 2-3 for the opposite side of the furoshiki.
- Complete!
Patchin (Video Link):
- Lay your furoshiki face-down on a flat surface
- Pull two adjacent corners through a single Patchin
Make sure the Patchin is oriented such that the magnets are facing the center of the furoshiki. - Use a square knot to tie the fabric corners protruding through the Patchin together
- Repeat steps 2-3 for the other two remaining corners
- Adjust the length of the fabric “handle” protruding from the Patchin as desired
- Complete!
There are even more ways to use Furoshiki with and without these accessories - feel free to share any discoveries and results in the comments!
Printing & Assembly:
This design is suitable for almost any 3d printed plastic, from PLA to PEEK. Prints are shown in Black ABS.
Supports are not required for these models.
In order to support the elegant design of these models, it is strongly recommended to print these models with a minimum of 4 shell layers (walls/floors/ceilings) and 40% infill.
Rings require no additional hardware or assembly after printing.
Patchin require four 6x3mm cylindrical magnets, which must be glued into the mating surfaces.
When installing the magnets, ensure the as-installed polarity pulls the Patchin together.
Like our work?
Purchase our masterpiece - the Tick Tock CircleClock!
IMPORTANT:
Please be sure to use all relevant PPE when working with your filaments.
This design is provided “AS IS” without warranty of any kind, either expressed or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.