Ball mount for phone, GPS, camera
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
1" ball mount compatible with many phone, GPS, and other small electronics.
- Rating
- 0 / 5
- Likes
- 27
- Downloads
- 140
- Makes
- 0
- Views
- 567
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
This model consists of a pair of ball mounts that are sized for 3mm hardware. You can choose between 2 versions of the ball, one that will take a hex nut inside so you can attach it with a 3mm screw, and the other that will take a 3mm screw inside so you can attach it with a nut. The clamp and thumbscrew knob also use 3mm hardware. The thumbscrew requires a 3mm square nut to lock the screw in place.
You can use this to design your own mounting system to attach the ball studs to a phone or GPS mount, or any other small electronics or devices. I designed it to mount a small thermometer to my ATV. you could also use this as a camera mount as well.
It's best to print using a durable, UV-resistant filament for outdoor use. At minimum, use black PETG, but ASA would be better. Even better if you can print with fiber reinforced filaments.
I used 25% gyroid infill with 5 perimeters, top, and bottom layers.