Prusa Hotend Nozzle Replacement Tool
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a nozzle change tool for the Prusa Nextruder hotend.
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 21
- Makes
- 0
- Views
- 684
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Standard Digital File License
I was tired of changing the nozzle while the hotend was still installed in the printer. Removing the hotend proved to be a good solution for a clean installation.
All you need is a suitable open-end wrench. The hotend sits securely in the holder, and a small lip underneath prevents it from falling out.
The hotend cables are securely attached to the back and cannot be bent or damaged.
I designed two different screw lengths so that the holder can be attached directly to the printer or to a tabletop. You can also hold the Holder with your free hand.
Be careful not to tighten the nozzle too much! If you apply too much force, the holder will bend to protecting the hotend from damage.
Follow me to not miss the future versions of the holder
- you need supports
- print min. 5 walls
- print min. 40% infill
- use PETG or better filament
HAPPY PRINTING