1 / 3
Dyson straightener (Corrale) PSU Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A custom wall mount for the Dyson Corrale magnetic 360° charger.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 60
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution
Versions
- Tape version – flat back with light recess for double-sided tape (20mm wide).
- Single screw version – one mounting screw for simple wall attachment.
- Dual screw version – two mounting screws for movement limitation.
- Clean - with no changes so you can add what you want.
Each version is available as both:
.stlfor print.STEPCAD editable
Recommended settings
- Material: PETG (charger can get hot but PLA might be fine)
- Layer height: 0.2 mm
- Infill: 10% (use CrossHatch Infill for better stability)
- Walls: 2
- Supports: Not needed
Mounting
- Screw size: 3–3.5 mm (Spax or M3 screw recommended)
- Countersink: 90°, 6.5 mm diameter
- Or use Tape: Use strong double-sided tape for a no-drill install