Simple PressFit Case with FreeCAD Project File
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Press-fit storage box with snap lid (95 mm), clean FreeCAD design, no screws needed.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 15
- Makes
- 0
- Views
- 61
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Public Domain
This model is a simple but well-designed press-fit box, consisting of:
Press-fit box with snap lid in two depths: 100×100×100 mm and small 100×100×50 mm.
Box inner size: 95 × 95 mm
Lid lip (outer size): 94.8 mm → 0.2 mm clearance fit
Chamfer (bevel): 0.3 mm at 45° on the inside edge of the box + top edge of the lid lip
Designed in: FreeCAD (Part Design), fully parametric
Two separate bodies: Box + Lid
Why does it fit so well?
The combination of the 0.2 mm tolerance and small 0.3 mm chamfer ensures the lid slides in smoothly and holds firmly by friction. No wobble, no resistance, no tools needed.
Print Settings
| Setting | Value |
|---|---|
| Material | PLA / PETG |
| Layer Height | 0.2 mm |
| Nozzle | 0.4 mm |
| Infill | 15–20 % |
| Wall Perimeters | ≥ 2 |
| Supports | ❌ None required |
| Print Time | Box ~3h / Lid ~1.5h (Ender 3) |
Features
Simple and parametric FreeCAD design
Snap-fit / press-fit lid (no screws or clips)
Ideal for electronics, screws, SD cards, small parts
Prints without supports
Open-source & easy to modify