1 / 8
BMX ultralight Hubguard Profile WeThePeople — image 1
1 / 8

BMX ultralight Hubguard Profile WeThePeople

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This Hubguard can be attached to the original cones and is held in place by tightening the bolts. No Additional Hardware

Rating
0 / 5
Likes
8
Downloads
39
Makes
0
Views
195
Reviews
0

Updated at source:

Model information

Category
Other Sports
License
Creative Commons — Attribution — Noncommercial — Share Alike

Additional weight of about 7–12 grams, depending on the model and/or print settings.

Only works with the female version of the We The People Arrow front hub and the Profile Mini front hub. It is less than half the weight of the original Profile hub guard, and should be strong enough for riders who mostly use their pegs for stalls or light grinding.

There is a cut-down version inspired by the Profile design, as well as a full version for both hubs.

Print laying flat, and scale X and Y by ±1% to achieve a tight fit that can still be pressed onto the cone all the way.

PETG recommended.

The last picture shows a comparison between the original(left) and the printed version(right)

Tags