Counting matching models…
plate for BMX race number. Expert size. New, updated version of https://www.thingiverse.com/thing:2830352 Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts: No Supports: No Resolution: 0,15 Infill: 100% Filament: any PET-G any…
!!!WARNING!!! I am not responsible for prints that do not turn out as intended or any damages that occur as a result of installation or usage of these buttons. !!!WARNING!!! If getting printed from JLCPCB, they are known for flagging…
3d printed barend for BMX. I tested it with PLA, but a stronger material might be needed.
BMX Rear Tire Lever use this to make replacing your rear wheel a breeze. I got tired of stacking tire levers, and made this- it pushes your tire back against the chain and keeps it straight while you tighten the rear axle bolts/nuts. I…
plate for BMX race number. Expert size Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Notes: printed with PET-G Category: Sport & Outdoors
Printed in TPU varius brands and for the most part it comes out nice …tricky thing that TPU :-)
I printed the side stand parts with GST3D PLA+ with a 0.4 Nozzle, 0.24 Layer, 6 wall lines and 10% infill. The connecting rods I printed with Enotepad PETG standig with 6 wall lines, 20% infill and Brim. I need to scale the X and the Y…
This is a bar end plug for a BMX handlebar. Note render of .3mf looks odd since there's a cylindrical ‘print setting’ modifier in there as well(see below). Plug has 18mm outer diameter with a wedge that can secure into a 19mm opening.…
I recommend some elastic material, not a really rigid one, but can be printed in any material you want as long as it is not too fragile.
Hello, I have a 1:10 RC Traxxas TRX 4 BMX bike for you. A very detailed BMX bike. It is fully authentic, you need to color it. It is in 1:10 scale. It prints very nicely. Good luck with the printing! I used PLA/PETG as the material. You…
I printed in PETG .2 layer height and it has held up over a year so far. TPU may be another good candidate. Simply knock the hinge rod through the old hinge with a small punch, and knock the rod back through the newly printed part. Make…
Fahrrad Griffe / bike grips / Oldschool BMX / not tested ! → 0.4 Nozzle → 0.3mm Layer Height → 25% - 50% infill → TPU → No support → für / for Lenkerdurchmesser / handlebar diameter → 22.2mm → Tiefe / depth → 95mm → not tested !
Quick and Simple Print, holds up great at just 15% infill so i wouldn't bother doing more.
Designed these coasters for some old school BMX ridding buddies. I wasn't going to post these here but I had a lot of requests from many bmx forums members to do so. -enjoy ! Print Settings Printer: ERYONE THINKER 2 V.2 Rafts: No…
Dies ist meine Idee die es so noch nie gegeben hat. BMX 20" mit einem 200 mm Dämpfer System. Ich bin gespannt auf Eure Makes.
Fahrrad Griffe / bike grips / Oldschool BMX / not tested ! → 0.4 Nozzle → 0.3mm Layer Height → 25% - 50% infill → TPU → No support → für / for Lenkerdurchmesser / handlebar diameter → 22.2mm → Tiefe / depth → 95mm → not tested !
Fahrrad Griffe / bike grips / Oldschool BMX / not tested ! → 0.4 Nozzle → 0.2 mm Layer Height → 25% - 50% infill → TPU → No support → für / for Lenkerdurchmesser / handlebar diameter → 22.2mm → Tiefe / depth → 95mm → not tested !
Additional weight of about 7–12 grams, depending on the model and/or print settings. Only works with the female version of the We The People Arrow front hub and the Profile Mini front hub. It is less than half the weight of the original…
Printed in PLA with 20% infill. The stem fit tight but if you press straight down down it should be okay, pull straight up to remove, do not wiggle. Slots on the side are there so you can use a regular switch puller to remove the caps.…
Made to fit the BlackOps steel pegs that I bought from Amazon in fall/autumn of 2021. Peg internal diameter of 29.25mm, external diameter of 34.75mm. You can maybe scale the parts to fit other pegs. Hardware: m5 x 35mm socket head cap…
Printing in PETG recommended for durability and flexibility. Some PLAs are elastic enough to do this but beware their all-weather capabilities. TPU 95A with high infill is suitable as well. Fits M5 x 20mm bolt and nut. (That's 20mm of…
Merritt Brandon Begin GFE Peg Sleeve – 4.75" Replacement BMX peg sleeve designed specifically for the Merritt Brandon Begin GFE Peg in 4.75" length . This is a consumable sleeve – perfect for extending the life of your metal core pegs…
✨ Features Modern neon‑style look created through layered 3D printing Lightweight and easy to hang on any wall Clean, minimalist design that fits both sporty and contemporary interiors Ideal gift for BMX riders, extreme sports fans, or…
Created a simple slip-on chain guard for a Colt BMX bike. Inside diameter is 19 mm, length is 190.5 mm, thickness is 4 mm.
Fahrrad Griffe Oldtimer / antique bike grips / Oldschool BMX → 0.4 Nozzle → 0.3mm Layer Height, → 50% infill, → TPU → No support → für / for Lenkerdurchmesser / handlebar diameter → 22.2mm → Tiefe / depth → 95mm
Inner dia. 19 mm (0.75") Tested material - Kimya ABS Carbon Two holes for a zip tie to fix the brake cables. ⚠ Do not tighten the zip tie strongly, the brake cables must move.
Should fit a standard BMX bar. Printed with TPU 95A for both the base and nut part. Model does NOT require support material. Uses one M6 socket head cap screw ( M6x25mm ) and one M6 standard size nut.
A start ramp, doubles, rollers, step up/down, table-top and chequered flags to create your own mini BMX racetrack. Everything is scaled for Tech Deck BMX (and skateboard) but other toys will work too. The features have a recess in the…
Refrigerator jump magnets. You can use your slicers stop function (like a color change) to insert 8mm by 2mm circular magnets into the print at the very last layer available to do so. Use your slicer to figure out what layer height is…
These bushings were designed for my Heybike Mars 2.0 ebike, to adapt the screen's mounts when swapping the original giraffe neck handlebar setup to 20mm BMX handlebars. They fit between the mounts and the 20mm bars, ensuring a secure and…
I removed the bottom tab as it was too thick for some cases I used the screws that came with the card, I don't know what size they are. The holes are 2,5mm Also check out my Fan Bracket…
Designed for a Noctua NF-A4x10 FLX, but should fit with any 40x40x10mm fan Also check out my PCIe Bracket https://www.printables.com/model/1403187-qlogic-qle8142-ibmx-pcie-bracket
Instructions uploaded as pdf. The drive behind these files was that we wanted to light up a local skatepark or spot but work lights often cost $200 or more. We had Feit-style rechargeable LED work lights from Costco. But the problem was…
I made this completely myself on Tynker cad sadly it does not come with files for brakes, grips or anything else but in the future I might make files for those obviously make sure to use support. I have not printed this myself yet but…
Placa porta numero impresa. Sugiero imprimirla en ABS
BMX Rear Tire Lever use this to make replacing your rear wheel a breeze. I got tired of stacking tire levers, and made this- it pushes your tire back against the chain and keeps it straight while you tighten the rear axle bolts/nuts. I…
Should fit a standard BMX bar. Printed with TPU 95A for both the base and nut part. Model does NOT require support material. Uses one M6 socket head cap screw ( M6x25mm ) and one M6 standard size nut.
✨ Features Modern neon‑style look created through layered 3D printing Lightweight and easy to hang on any wall Clean, minimalist design that fits both sporty and contemporary interiors Ideal gift for BMX riders, extreme sports fans, or…
I broke the the latch on my cooler and couldn't find a replacement anywhere so made this. Printed in ASA for weather resistance. Orientated top down and used support for flange at back. Also aligned my seams to back of part
Can be used if the Receiver is too far away from the tire in order to make a bike computer read the rotation. Works with zip tires.
Simple circular BMX style bowl bicycle helmet with an inner diameter of 22mm. Black metal gardening wire is a nice way to get a realistic, solid, chin strap. Probably fits most handlebar dragons and is a nice functional bicycle addition…
My interpretation of a Skyway Tuff 2 BMX Wheel. This model is based on the rear wheel, the front wheel hub is slightly different, will model a front wheel soon. This is not a 100% accurate model as I've just used photos as a reference,…
"I printed it using PETG-CF filament with only 45% infill , and it's holding up well. I tried standing on it, and it easily supported my weight of about 80 kg. However, I'm not entirely sure if it can handle jumps or slides, so please be…
BMX Grips designed and 3D printed for Swedish BMX legend Tobbe and his BMX Museum: http://www.bmxmuseum.se/
Use your own TPU settings …tricky stuff :-) Keep these 80´ties BMX bikes alive …The last real men in the world was riding them back then. Happy printing , restoring and riding !
This is an adapter to BMX seatposts siezed post. From 25.4mm to 30.8mm seatpost adapter. I print it in ABS and is working great for 6 months now. I didn't remember that It has letters, because they didn't print well, they are too small.…
Explore our hexagonal frame, ideal for hanging on a wall or standing on a piece of furniture with its stand. This decoration features a BMX rider in front of a ramp, with a palm tree in the background. The frame is printed with the wall…
Needed an adapter to mount cheap sprocket from AliExpress on girlfriends dirt jump bike. Model parameters are set for Norco One25 which uses a bmx “mid” style bottom bracket with 19mm crank spindle. Testing with PLA first, but will…
Drifts to fit and center MID (41.2mm OD) press-fit bottom bracket bearings 19mm ID install drift 22mm ID install drift* 24mm ID install drift* Bottom Bracket Centering Drift opposing centering drift **posted files are for use with m8…
Cover the protruding axes of your BMX bike with these covers. Mount them by screwing them on. If you fall of your bike, the risk of hurting yourself on the axles is reduced. Printing: no supports needed. PETG, ASA, ABS preferred.
OK few people require a front brake on a BMX but in some countries bicycles used in public places must have two working brakes to be legal. If you are involved in an accident with only a single brake you it can be difficult to prove you…
