BMX ultralight Hubguard Profile WeThePeople
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This Hubguard can be attached to the original cones and is held in place by tightening the bolts. No Additional Hardware
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 195
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Additional weight of about 7–12 grams, depending on the model and/or print settings.
Only works with the female version of the We The People Arrow front hub and the Profile Mini front hub. It is less than half the weight of the original Profile hub guard, and should be strong enough for riders who mostly use their pegs for stalls or light grinding.
There is a cut-down version inspired by the Profile design, as well as a full version for both hubs.
Print laying flat, and scale X and Y by ±1% to achieve a tight fit that can still be pressed onto the cone all the way.
PETG recommended.
The last picture shows a comparison between the original(left) and the printed version(right)