1 / 2
Eyecup for Olympus GWH 10x Eyepieces — image 1
1 / 2

Eyecup for Olympus GWH 10x Eyepieces

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Eyecup for Olympus GWH 10x Eyepieces

Rating
0 / 5
Likes
0
Downloads
7
Makes
0
Views
37
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Noncommercial

NOTE: An updated, and more comfortable model is available here.

These are flexible eye cups with dust caps intended to fit the GWH10x eyepieces (30 mm) that sit in a Olympus VMZ stereo microscope.   The fit is secure enough to lift the eyepiece by but not difficult to install or remove.
 
I've tested 95A TPU and 85A PEBA.  They perform similarly to each other in this application, however, the PEBA is a tiny bit stiffer in vertical compression than the TPU.  

If you have a softer filament like a foaming TPU or PEBA they might be a little more comfortable. I printed them upside down with supports. Supports came off without much scarring at all.

The dust caps fit securely but are easy to remove with one hand. 

Tags