Ipad Mini Airplane Yoke Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Here is a holder for an Ipad Mini in your airplane, it connects to the yoke.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 32
- Makes
- 0
- Views
- 389
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial
Ipad mini holder which connects to the yoke for easy reference and viewing by the pilot.
Print the “holder” on the side, I used brim. Everything else prints as imported without brim or supports. I used 1" screws and wing nuts to attach the arm to the yoke mount and ipad mount. The Ipad mount can be secured at whatever height you desire by using the holes. I drilled out the holes in the arm mount a small amount after printing for easy assembly with 1" 6/32 screws.
The original model arm was too short, so this arm is lengthened and fits the Piper Saratoga well. My charging cable did not fit inside the cutout from the original model, so those holes are larger as well.