Ipad Mini Airplane Yoke Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here is a holder for an Ipad Mini in your airplane, it connects to the yoke.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 389
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
Ipad mini holder which connects to the yoke for easy reference and viewing by the pilot.
Print the “holder” on the side, I used brim. Everything else prints as imported without brim or supports. I used 1" screws and wing nuts to attach the arm to the yoke mount and ipad mount. The Ipad mount can be secured at whatever height you desire by using the holes. I drilled out the holes in the arm mount a small amount after printing for easy assembly with 1" 6/32 screws.
The original model arm was too short, so this arm is lengthened and fits the Piper Saratoga well. My charging cable did not fit inside the cutout from the original model, so those holes are larger as well.