Skadis Fujifilm dual charger - NP-w235
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a Skadis mountable holder that support FUjifilm dual charger. There is a very nice snap that secure it in place.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 13
- Makes
- 0
- Views
- 52
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
*model in pictures is PLA
Print settings
Nozzle size ......................... 0.4 mm
Layer height ....................... 0.2
Number of perimeters ... 2 (or more)
Infill ...................................... 15% (or more)
Supports ............................. only for the back hooks
Bed surface ......................................... glue stick + brim (if PLA)
Hotend temp ...................................... 240c / 210
bed temp .............................................. 80c / 60
Materials used: .................................. PETG / PLA
Additionnal parts
Skadis sheet with holes