1 / 5
Vacuum Tool for TightSpace
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A special 3D-printed vacuum cleaner attachment for cleaning narrow spaces, especially in the car.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 24
- Makes
- 0
- Views
- 120
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution — Share Alike
This part was tested extensively. At first, I printed it in a vertical orientation, but that resulted in low strength due to the layer direction. Next, I tried printing it lying flat on the print bed, which caused a lot of stringing since I didn’t want to use internal supports.
To solve this, I made the following adjustments in the slicer:
- Set the print orientation to 45°.
- Increased the support threshold angle to 45°.
- Disabled supports on the inner surfaces of the attachment to keep the inside clean.
After these changes, the print quality and strength improved significantly.
I hope you enjoy the design and find it useful!