1 / 3
Ender3 Motherboard cover with fan silencer — image 1
1 / 3

Ender3 Motherboard cover with fan silencer

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a combination of SoBaldrick's 'Ender 3 Lid' and RohaniSousBois' 'Ender 3 Power supply fan silencer'. I removed…

Rating
0 / 5
Likes
7
Downloads
41
Makes
0
Views
379
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution

This is a combination of SoBaldrick's 'Ender 3 Lid' and RohaniSousBois' 'Ender 3 Power supply fan silencer'. I removed the fan grill from the lid and then resized the fan silencer to fit the stock 40mm motherboard fan. The fan silencer was then extended to reach to the edge of the cover. This should prevent the motherboard fan from sucking up any filament and should reduce the noise. The stock screws for the fan will not be long enough, any screw just a few mm's longer will do the job, you will also need nuts for those screws. The rest of the screws for connecting the cover to the rest of the enclosure will still fit.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

No

Resolution:

0.2 mm

Infill:

10%

Filament: Hatchbox PLA Black


Notes:

Do NOT print with supports, an absolute nightmare to remove, and completely unnecessary. As long as your printer is capable of bridging at all it should work without supports.

With the settings listed above:

printed in ~5 hours with 43 grams of filament

Category: 3D Printer Accessories

Tags