Ender3 Motherboard cover with fan silencer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a combination of SoBaldrick's 'Ender 3 Lid' and RohaniSousBois' 'Ender 3 Power supply fan silencer'. I removed…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 379
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This is a combination of SoBaldrick's 'Ender 3 Lid' and RohaniSousBois' 'Ender 3 Power supply fan silencer'. I removed the fan grill from the lid and then resized the fan silencer to fit the stock 40mm motherboard fan. The fan silencer was then extended to reach to the edge of the cover. This should prevent the motherboard fan from sucking up any filament and should reduce the noise. The stock screws for the fan will not be long enough, any screw just a few mm's longer will do the job, you will also need nuts for those screws. The rest of the screws for connecting the cover to the rest of the enclosure will still fit.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2 mm
Infill:
10%
Filament: Hatchbox PLA Black
Notes:
Do NOT print with supports, an absolute nightmare to remove, and completely unnecessary. As long as your printer is capable of bridging at all it should work without supports.
With the settings listed above:printed in ~5 hours with 43 grams of filament
Category: 3D Printer Accessories