1 / 2
Minimalist iPad Stand (Holds 1 or 2 iPads) — image 1
1 / 2

Minimalist iPad Stand (Holds 1 or 2 iPads)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I designed this minimalist vertical stand to keep your iPad (or iPads) organized and save valuable desk space.

Rating
0 / 5
Likes
1
Downloads
20
Makes
0
Views
79
Reviews
0

Updated at source:

Model information

Category
Office
License
Creative Commons — Attribution — Noncommercial — Share Alike

This design is specifically optimized to fit an 11-inch iPad (Pro or Air) while it is in a standard case. The slot is wide enough for most common slim cases (like the Apple Smart Folio).

It might also work for the larger 13-inch iPad, but I have not tested this. If you print it for a 13-inch model, please leave a comment to let others know!

This project includes two models:
-Single-Slot Version (Holds 1 iPad)
-Dual-Slot Version (Holds 2 iPads)

Cable Management
-Both versions include integrated pass-through holes for charging cables.

Important Cable Note: The charging holes are precisely modeled to fit the official Apple USB-C cable connector. Other third-party cables might be a tight fit or may require minor tinkering to fit, I used 3 sec glue to hold the cables in place

Printing Recommendations
-Supports are required.
-You will need to add supports (e.g., "Supports on Build Plate Only") for the cable pass-through holes to print correctly.
-Infill: 15-20% is recommended for good stability.
-Fuzzy Skin (Optional): To get the textured look from the photos, enable the "Fuzzy Skin" setting in your slicer (available in Cura, PrusaSlicer, etc.). I used the default settings for it.

If you have any issues or suggestions, please leave a comment below and I will try to fix it.
Hope you find this useful. Happy printing!

Tags