1 / 4
Bucket Handle Stay Upright Clip
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This clip keeps your bucket handle up and ready to grab again.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 18
- Makes
- 0
- Views
- 83
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Does your task have you constantly picking up your bucket over and over? Keep your handle upright and ready to grab again without bending over so far.
The arms can be bypassed easily by pushing the wire handle loop over the arm. Also, the buckets can still be nested with the attachment in place.
Print conditions:
- PETG, 0% infill, 2 perimeters and with supports.
- The part needs to flex over the rim. Stiffer printing parameters (e.g. 30% infill) or using stiffer plastics like PLA and PC have not been tested. Change settings beyond the attached 3mf at your own risk :)
Credit to @Ryan_186361 for the bucket handle shown in the 2 gallon bucket photos. Thanks!