402 models
When you wash your car with a bucket of soapy water, the dirt that comes off the car ends up in that bucket. This grit guard captures that dirt and keeps it from getting back on your sponge and scratching the paint. It was inspired by the…
Also doubles as a great way to suspend clippings in your tank :) 0.2mm layer height, 3 perimeters, no infill. ASA/ABS or PETG recommended.
This is an ATO pipe holder for a Petco 40 breeder rimmed tank. My Smart ATO Micro wouldn't work with a rimmed aquarium so I made this to make it work. ATO:…
For the filament storage/dry box you will need an IKEA SAMLA (45l/12 Gallon) box, a wooden broomstick and 16 small woodscrews (2 nails are optional). If you just want to store and dry a few rolls of filament, you can just print 4 endcaps…
I made this because I had added an extra 15 feet of power cord to my 14 gallon Bauer Shop Vacuum. The carrying handle could not hold the added footage. These push on the ends to make it longer.
I wanted a better way to store my 17 gallon totes, so I came up with this rack. It's fairly easy to make and requires some 2x4s, screws and casters. Here is a cut list (all pieces are assumed as 2x4s at nominal 1.5" x 3.5" unless…
The model of this bucket is full size and I typically print at 1:5 scale. I have a full build video (five minutes) below including the handle. The model is full scale. These buckets are great as a desk organizer for pens and pencils, they…
Fits standard US 1 Gallon Milk Jugs. Or it at least fits the gallon jug (iced tea) I had around when i made this. It's a 38 mm cap Grip version and smooth version It doesn't leak from the seal or threads when held upside down. Print…
UPDATE 23.08.2024 The NEW VERSION is more stable and the small lid fits much better!!! ----------------------------------------------------------------------------------------------------------- Printed on Prusa MK4 with input shaping,…
Handful of nozzles for the Ryobi P3240 3 Gallon Wet/Dry Vac. These are created from Zivbot's customizable vacuum tool original scad file (re-uploaded with these files if you want to create your own). To recreate these nozzles:…
Designed this to replace a cap from one of my 5 gallon blue water bottles. It's 57mm OD by 11mm tall. How I Designed This Design notes You can design your own pretty easy. Use Fusion 360 to create a cylinder of the appropriate size, drop…
***Important Note: The quadrants are NOT identical. You will need to print one of each for the center threads to work correctly. Each is embossed with its number, and they are arranged counterclockwise.*** A pretty simple idea that I…
Update 30JUN23: Added a 3mf version of a majority of the files, to locate them they have 3mf included in the beginning of the file names. If I missed a piece or you want a different piece, let me know. Update 17APR23: Fixed an issue with…
So I had a few 5 Gallon jugs with silly excuses for lids. I can fix that! Okay so in order to print lids that fit your Jugs you will need to do a little Math. if you like math, this should be easy. If you don't, no worries I will help you…
This handle will replace the small and often broken handles that come on 5 gallon buckets. This is designed around a standard 10 gauge wire (0.135" diameter) 5 gallon bucket handle. Often the wire handles will have a bend at the top where…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** Behr paints claims that their new spout that comes free with my paint purchase…
This is a chamber 1 filter basket for the Fluval Evo 13.5 gallon Nano Reef Saltwater Aquarium. It's customizable, but there's an included model of the 3 divider model featured in the cover image and photo. The dividers for the…
A small charm with a loop for mounting. Best printed using resin in batches. There is usually a little spoilage in removal when you print this small. Use 1 or maybe 2 sprues per piece. Disclaimer: Please refer to the manufacturer of your…
[Updated Dec. 28, 2020 to add files for PETG] The cheapest way for me to buy alcohol for build plate cleaning is to buy denatured alcohol in a 1 gallon metal can. Unfortunately, pouring out of these cans, even using a funnel, tends to be…
This is an adjustable Ziploc bag holder. 20% infill is plenty. Fit is a bit tight but will loosen with time.
I bought a bunch of 5 gallon jugs to fill my inside cistern on my property, but the caps were too hard to get on and off. My hands just don't work like they used to, and trying to twist and pull those caps with the hole in the center for…
A 1:48 Scale 33 Gallon Rubbermaid Brute Trash Can
If they work for you, please give it a like! Thank You! Pour spout for those 5 Gallon buckets with the pull-out plugs. Not sure if they are all the same size, you may need to scale up or down. Cap was scale up to 105% in X&Y because I…
This grit guard is designed for placement at the bottom of a standard big box store 5 gallon bucket to capture dirt and prevent scratching while washing your car. This design is a remix of @CherryPickerSocerer's grit guard, which was…
Slot car or train layout scenery. If printed at 100% it scales 1/24. The examples shown where paused during printing to change fillament colors.
Replacement Handle for a 5 gallon bucket. Wanted something that didn't need screws or glue but more secure than the print itself. Designed to utilize a pair of zip ties. The head of the zip tie is recessed into the handle and the tail…
So, I noticed a mouse in my garage and decided to remedy this. I have a 5-gallon bucket from Lowe's hardware store and noticed that it already had a spinning contraption built into its handle. So, I designed a finned bait-holder that can…
Two models are attached, regular and mini. I believe the mini will fit on the mini printer. To build the adapter, you'll need 4 of the large prints or 6 of the mini. Additionally, you'll need M3 screws, washers, and nuts. The fins are…
I got tired of digging through my PVC fitting bucket for the right fitting so I created organizers that fit in the bucket and create 12 separate compartments to organize them.
Adapted from the plastic milk jug 38 mm cap model using the gripped version. Big thanks to @mcfada for providing the f3d file! Extended the inside flange and geometry, so the part can be printed without support. Would suggest using a brim…
This is a replacement water jug cap for a common blue 6 gallon Igloo water jug. The old cap split on the 2 water jugs that we have. Print out of PETG for water safety and strength. Re-uploaded a new .stl that is scaled correctly (based on…
Perfect seal for 5gallon on 19l water jugs, it is form 3 parts, lid thread, and the seal seal you make from rubber i made from 2mm sheet, to cut the seal just place the thread part on rubber sheet and cut around, place in the lid, after…
I made these boxes to hold various size ziplocks in our bag, foil and wrap drawer. The cardboard boxes created a chaos. Because the drawer is fairly deep I also attached a platform under these boxes to lift them up to a comfortable height…
Tanker Car 8000 Gallon - Dragon Railway 1/64 Scale Assembly Manual: Google docs You will also need: Freight Bogie 1750 840 Auto Coupler V2 Check out the Dragon Railway ecosystem! Join our Discord If you are happy, Buymeacoffee!! Print…
This design allows anybody to feed bees and or attract them to their gardens for pollination. You can use a 2 gallon or 5 gallon bucket from the hardware store. This design almost eliminates drowning bees and fighting bees due to its…
This is a simple lid for 20 liters of water (or 5 gallons). The lid does not come off the gallon so easily, and needs to be pushed in with a little force, precisely for temporary storage or transporting an open gallon that still has water…
Container / Dispenser for freezer (Ziploc) bags Prints in two pieces and snaps together Doesn't need supports if printed with the flat sides down
V1 is a solid model. Supports are likely required V2 has been split into pieces for easier printing w/o supports
A threaded screw-on spout for the 5-gallon isopropanol drum from McMaster-Carr. Several spout designs available. Still in testing.
Mods for my 5-gallon tool bucket. Starting from the bottom: outboard caster brackets to increase the wheelbase and make it possible to use locking casters. Makes the whole thing very easy to spin while looking for a tool, and moving on…
I printed the cap and mount at 0.3mm line width just to squeeze out a little more quality. The cap fit tightly enough that I didn't bother even adding glue to keep it in place. I also printed the mount as oriented with slim tree supports.…
Door/wall mounted holder for gallon sized ziplock style bags . We wanted a way to have the gallon sized ziplock bags easily accessible. So I made a two part box that can be hung inside the panty door and hold the zip lock bags. The bottom…
Sump for 30-120 Gallon Fresh or Saltwater tank with Dual Media Chamber design. Enough space for 85% of pumps, drill your own output to size/height needed. Designed for PETG, ASA, ABS & PLA+ CAUTION: IF YOU ARE GOING TO USE REGULAR PLA DO…
Is your water storage up to date? You'll need this to get that plug off your 55-gallon water barrel if you want to be sure. This comes in two versions. Pick which one you like and print the two parts associated with that version.…
This trap is designed to be either a humane live catch trap (if you leave the bucket empty), or a… not so alive catch trap (if you ~quarter fill the bucket with water) I recommend that you scale the housing to the largest size your…
Holder designed to help anyone with a weak grip to carry and pour from a half gallon milk or juice container. Printed with PLA on a Prusa MK3.9S using organic supports on build plate only
This is a replacement cap for a Enviro-Bottle 5 gal jug (3 Gal should be the same). It may fit other 5 gallon bottles Thread go all the way to the top. you may want to add paper seal in the cap to prevent leaks like the originals came…
2-Gallon Bucket DWC Hydroponic Lid – Convert Your Lowe’s Bucket into a Deep Water Culture System! Turn a simple 2-gallon Lowe’s bucket into a Deep Water Culture (DWC) hydroponic system with this print! Designed for small-scale hydroponic…
Igloo 5 Gallon Drinking Water Cooler Cup Holder for Solo Cups with marker holder I wanted to use larger solo cups with my cooler when at outdoor events. I think the stock tube comes is smaller, for the paper disposables. With this…
I made this to prevent my bucket from collapsing under a vacuum while blocking the end of the hose while using the Oneida low profile cyclone and a 5 gallon bucket. Scale to fit your exact bucket. Mine was 11" and I beat it into place for…
This is a bucket spacer made to keep bucket lids slightly off of the tops of 5 gallon buckets. On our property we use these to enable mosquitoes to enter and lay their eggs in Mosquito Dunk water in order to control the mosquito…
Grouping of three international standard 55-gallon drum at 25 mm (1:64) scale for use Gaslands/Matchbox/Hot Wheels
International standard 55-gallon drum at 25 mm (1:64) scale for use Gaslands/Matchbox/Hot Wheels
I have a small 10 Gallon tank with dwarf water lettuce floating on top. I wanted to keep them away from the center of the tank, and I've seen floating partitions before, but it gets in the way of the front of the tank for me. So i made…
It is really hard to get off the Behr deck stain lid that is screwed on to the 5 gallon bucket. At Home Depot, they have a special tool they use to open and close the container, but they don't sell them. Thus I created this tool to allow…
A simple perforated desiccant gel container for filament storage This desiccant container is designed to sit at the bottom of a two gallon bucket to keep your filament dry. Two gallon buckets fit three rolls of filament nearly perfectly -…
Context Cyclone dust separators are great for separating shavings and dust before they reach a shop vacuum and clog the filter. Some variants come as push down 5 gallon bucket lids that can be difficult to remove. An alternative to push…
5 Gallon bottle filler for for filtering using a standard Brita pitcher and dispenser filter. Attaches to M24x2 Threaded sprayer hose. Vented through internal channels to prevent air lock. Teflon Tape recommend on threads. 100% infill…
Simple cap for 5 gallon water jug to keep dust and debris out. Simply sides over top of jug not water tight or secured. 15% infill 0.2 layer height PLA No Supports Print Flat Side Down
You really only need 2 of them per can. To lock in place insert sideways and rotate 90 degrees.
Threaded funnel that fits 1 gallon "STP" brand oil jug and washer fluid jugs. Print Settings Printer Brand: Creality Printer: Ender-3 v2 Rafts: Doesn't Matter Supports: Yes Infill: 20 Filament: NAGA PETG Black Notes: Print upside down, so…
M18 2 Gallon Compact Quiet Compressor Wall Mount for 16 inch Studs. This Wall mount is good for easy storage of the compressor. It allows for an individual to remove the compressor at anytime. Printed in ABS to help with the weight of the…
Just a plug for the jug to insert money into
2 models, one has a hole in it for if you want to run some rope or wire through it to attach it to the jug itself. the other one doesn't. unless your using a specific filament that can withstand the chemical properties of gas, don't let…
lid to turn a 5 gallon water jug into a piggy bank. I have a toddler who loved to shove any and everything that would fit into our jug, so this model ensures we can still save our change without having to dig out miscellaneous toys…
I designed this cyclone flange adapter to fit walmart 5 gallon buckets. It worked great for me. Printed using PLA at .2 resolution, using 100% infill and support touching build plate only.
Note that this is not for a screw on milk cap style jug, this is for the snap on cap of a typical distilled water container, though they look similar. prints on surface, no brim or supports. I use it refill my neti pot but it's helpful…
I took the diameters of the top of the bucket and the area where I wanted to cut my bucket and made a spacer that sloped from the larger opening to the smaller diameter for the top bucket. If you decide to cut the top bucket shorter, it…
These will help solve two of the biggest issues I've run into with the Kratky bucket methods. No more algae growth, print these in a black filament (or paint them) and they will sufficiently block out all light beneath them If your…
Holder for Yeti Rambler 1 Gallon for the front floor area of a 2021 GMC truck. STEP file included if you wanted to modify it.
Bottom face down, print with support to get the best result.
Useful to get every last drop of your product into a new jug.
Ein optimierter remix der Ikea Samla Deckel Clips. Ich habe ihn auf ca. die Hälfte gekürzt, aber so, das die Scharniere sinnvoll für maximale Stabilität geteilt sind. Gedruckt mit Amazon Basics PETG. Das Filament sollte kalibriert sein,…
I wasn't happy with the filter that came with the Aqua Culture 5 Gallon Glass Aquarium kit. There was little to no carbon, and the instructions said to replace it each month. Nahh. So I created my own filter basket where I can add my own…
This is a simple lid for 5-gallon jugs that has a hole allowing for an airlock. The hole is about 11.5mm in diameter, allowing for both the airlock stem and a rubber gasket to fit snugly.
A threaded screw-on cap for the 5-gallon isopropanol drum from McMaster-Carr. A rough FreeCAD model of the neck in available as well.
Rubbermaid 121 L (32 Gallon) Outdoor Trash/Garbage Can/Bin replacement handle. No support, press fit so no screws or glue needed, but can be added for extra strength
40 minutes to print no supports print in place Glue it on
This gives you a nice place for the turtle food bowl that wont turn over. Gives the turtles an island and a diving board. Fits 5 gal tanks. approx 7.75" deep.
I have quite a few 5 gallon buckets, and trying to separate them when I need one is often a hassle. This little clip doesn't take much filament, but it punches well above its weight class, allowing me to throw a few of these on my…
A simple drying rack for washing, drying, and reusing gallon bags. It is designed to be built with 3/8 inch (approx 9.5 mm) wooden dowels. The drying rack slots together, and can be easily disassembled and stored flat. If you're not using…
My mother-in-law didn't want to pay for something similar from Amazon, so my wife told her I could print one, which she didn't believe…. challenge accepted… :-) I couldn't find a free model that I liked, so I decided to design one from…
A cap I designed to loosely fit over a 5 gallon container. This was designed with a hole so that I can feed my plant watering stake's pipe through. Watering stakes I use: https://www.amazon.com/dp/B0001IOZ98
Internal scan of a 5gal masterforce container from menards. I eventually plan to make something to fit inside of this, but of course needed to get the internal dimensions. Files attached are a SCAN/stl/mesh only, not nice geometric step…
Wanted something better to replace my 1 gallon bags i've been growing in that would allow easier LST without poking holes in the bags. I have printed these in PLA, PLA+, and PETG so far and all 3 do well without supports albeit the PETG…
I have an Anycubic Kobra 3 and the gallon container did not fit on my print bed. I split the box and lid into 2 pieces to allow me to print it. I added the dovetail connector for more strength. Glue them together or use a 3d print pen to…
I recently purchased a dust extractor and the vacuum can collapse the 90mil 5 gallon bucket. I have a cyclone to separate the dust into the bucket. The bucket will collapse eventually no matter how careful I am with the hose and usage. I…
Simple bracket to hang an inline filter on a standard 5/6/7 gallon bucket. I use this for sieving pottery clay and glaze but it's perfect for homebrewers as well. I used this filter I got from Amazon . This filter is sold on Amazon under…
Models of an empty half-gallon quart of milk. Not intended to be printed in fused filament.
A simple shim to adapt the flat yoke of a mini UV floodlamp to the curved side wall of a 5-gallon buck to make a cheap curing station. This bracket is for mini flood lamps like the kind that are found in UV light and solar turntable…
Couldn't find a model anywhere for the 2 Gallon sharps containers I use in my tattoo studio to mount them to the wall. Saw this model by zoejanexy on Thingiverse however it was not the right size and shape for my standard containers.…
This is a cap wrench made for Walmarts "Great Value" brand half & half carton caps. It's difficult to grip these shallow caps tightly enough to twist them off the first time. This wrench makes these cartons easy to open. Whatever happened…
https://MineeForm.com/ ✅ Unlock All STL Files Immediately ✅ Make Money by Selling 3D Prints ✅ Only $10 a Month (Cancel Anytime) Category: Models
This is designed to fit the small Rubbermaid recycling bin with SKU FG295573BLUE, often listed as 13 qt, 13.6 qt, 3.25 gal, 3.5 gal, or 4 gal (sold by Rubbermaid Commercial , Grainger , and others). The rim fits over the bag/liner on the…
Replacement off the shelf power switch for performax air compressor
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
A friend created this file for me when my the debris cover on my rain barrel was destroyed in a hail storm. Hopefully this will come in use for someone somewhere.
Replacement proprietary nuts for Lifetime brand 80 gallon compost tumbler. https://www.lifetime.com/lifetime-60058-80-gallon-composter-tumbler Design changes: the OEM ones are sealed on one end, but I made mine open on both ends so that…
