1 / 4
Bit holder, magnetic for Bosch drill
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bitholder for up to 14 bits; using 7 6mm diameter 2mm thick magnets. Designed for Bosch GDX 18V 200 C(also fits ohters).
- Rating
- 4.857 / 5
- Likes
- 70
- Downloads
- 450
- Makes
- 9
- Views
- 2,570
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print upright with the deeper holes facing down, without support. The magnets are inserted after printing.
There is a version with hexagonal holes and one with round hole. I use the hexagonal one and it doesn't bother me at all bringing the bits in the correct orientation.
Use 7x 6mm Ø 2mm thick magnets.
I found the tolerance a bit tight when in PETG as opposed to PLA. So upscaling by maybe 2% might be adequate when using PETG.
Apparently it also fits the GSR 18v and GDR 18v.