1 / 2
Multi-purpose pocket for Cooler MAster Qube 540
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
You can place it on front or side, good for example to place in there USB drive, phone, or other devices
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 10
- Makes
- 0
- Views
- 149
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
Multi-purpose pocket, that can hold for example usb drive, phone or other device that r connected by cable to pc (on sides I add holes that can be used to place in them cable that r connected to PC that can be used as cable managment).
Print:
- file is designed to be printed without support, but it can be needed a raft;
- 0,2 mm layer, 0,4 mm nozzle - that prohect was designed with having in mind that layer lines, and this nozzle;
- I think that 5% infill will be good, but use 3 layer walls - I dont test this but on thatsettings it should be stiff enough;
- on 2'nd image is showed how I think that it should be placed on plate to be prineted - it;s importand specify becose of way I designed mounting, of course u can prin It in other direction but than u will need support;