1 / 2
Multi-purpose pocket for Cooler MAster Qube 540
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
You can place it on front or side, good for example to place in there USB drive, phone, or other devices
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 152
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
Multi-purpose pocket, that can hold for example usb drive, phone or other device that r connected by cable to pc (on sides I add holes that can be used to place in them cable that r connected to PC that can be used as cable managment).
Print:
- file is designed to be printed without support, but it can be needed a raft;
- 0,2 mm layer, 0,4 mm nozzle - that prohect was designed with having in mind that layer lines, and this nozzle;
- I think that 5% infill will be good, but use 3 layer walls - I dont test this but on thatsettings it should be stiff enough;
- on 2'nd image is showed how I think that it should be placed on plate to be prineted - it;s importand specify becose of way I designed mounting, of course u can prin It in other direction but than u will need support;