1 / 1
X-Acto Letter Opener [easy to print]
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easier to print version of Teraflops letter opener
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 66
- Makes
- 1
- Views
- 321
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
An easier-to-print version of @Teraflop's X-Acto Letter opener. Uses a #11 blade that's placed inside the print, pause it between layer 8 and 9 (if printed @0.2mm), insert the blade and continue (as the original).
Rounded edges swapped to chamfers, tip modified so it lays flat on the printbed. also flatter overall.
You might need to flatten the steps on the pin using a file or knife so it glides better through the envelope.