1 / 4
Vacuum AYCO HAVC-218 wand extension clip assembly — image 1
1 / 4

Vacuum AYCO HAVC-218 wand extension clip assembly

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Replacement clip for holding the wand extension part.

Rating
0 / 5
Likes
0
Downloads
2
Makes
0
Views
19
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

The hook/clip that was holding the extension wand broke. I have made replacement parts for it.

If the plastic part on the wand is still holding, you can just print the hook. I have made it slightly thicker to increase the strength. To replace it, you would need to disable the whole vacuum shell.

I have also modelled the plastic slot part on the wand side. Since the only way it's holding to the metal rod is by using a plastic nipple that can/will wear off in time. I have replaced it with a 4.5mm hole for M5x18 self taping screw. It is possible to put a longer one to around 30mm.

If you are using the previous part, you need to add the included cap at the end of the wand extensions. This is to reduce the free space that will allow the wand to move in and out of the vacuum shell. It is to reduce the stress that would be put on the hook and slot. 

I have included the step files if you need to make modification.

Tags