Electric Chute Control Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple up, down, left & right control box for snowblower's electric chute controls that mounts to my Kioti's 2x2 ROPS.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 68
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Share Alike
This is a control box for my tractor's PTO snowblower electric chute controls. I printed this control box and ROPS mount with black PETG. I used 4 walls, 50% infill (gyroid), and no supports needed. It holds two momentary illuminated rocker switches. I used stainless #6 sheet metal screws that cut coarse threads into the box mounts pilot holes. The bracket clamps to the 2x2 ROPS using 6mm stainless hardware. Note: This box is not waterproof. My feeling was water will get in and always finds away in. The box fits loosely on the bottom/bracket, this loose fit coupled with the wiring holes in the bottom will allow the water to drain out.