1 / 4
22AWG DIY Electrical Wire Spool holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spool holder for Aliexpress AWG wire's
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 41
- Makes
- 0
- Views
- 221
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Edited to fit DIY Wire from aliexpress:
https://www.aliexpress.com/item/1005005450270866.html
Please note!
- 3mf file has cutout block in base! Printing base from STL will not fit spool!
- wireholder needs to be printed twice, I superglued 2 pieces together for easy assembly.
- this is just for 22AWG spools.
Changed original:
- make smaller insert to fit 21mm spool inside
- make insert wider to better fit wider aliexpress spool
- fill notch a little bit to make room for wider aliexpress spool
- cut piece from bottom to fit higher aliexpress spool
Ends/side-pieces and middle arch-piece still same as original.
For other end/side-piece check original.