Toilet Paper Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fully 3D printed wall mounted toilet paper holder
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 21
- Makes
- 0
- Views
- 86
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial
My toilet roll holder broke, so I looked for a replacement and found this model from @wulfithewulf.
As my existing mounting holes are different, I remixed it in FreeCAD to suit my needs.
I have also attached my FreeCAD file so that anyone can adjust the dimensions.
The mounting holes are 80 mm apart (centre to centre) and have a diameter of 4 mm.
The holder has a diameter of 28 mm, and the end stop has a diameter of 38 mm.
It fits German toilet rolls.
I printed it in ABS with supports on the build plate to prevent the round roll holder from sagging.
You should definitely print it with three or four perimeters and an infill of at least 20%.