3D Scanner Resolution Test Artifact
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D printable resolution test artifact that can be verified with a Caliper. Used to compare 3D Scanners
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 51
- Makes
- 0
- Views
- 477
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — Noncommercial
People constantly ask if one 3D Scanner is better than another. Users can often look at two 3D scans and say which one has better detail. Unfortunately vendors don't typically show how they get their Accuracy and Resolution Specifications. Often the test equipment is expensive and not something easily found by a consumer. In previous videos we have shown how to use simple step-blocks, 1-2-3 blocks, Billard Balls, and Flat plates to check accuracy. Here we have come up with a simple artifact that can be 3D printed. It can be checked with a caliper for accuracy. It can then be used to determine what a 3D scanner can resolve. Accurately resolving sharp edges is important for Reverse Engineering.
Here are the parts I used:
- Revopoint 3D POP Scanner ( https://youtu.be/qjmi15GX29Q )
- Elegoo 3D Resin Printer, Cure, and Cleaner ( https://amzn.to/3KulKP8)
FTC Disclaimer: We may earn commissions for purchases made through the links below. As Amazon Associates we earn from qualifying purchases.