Counting matching models…
A sample of some of the parts available in the full kit. Pre-supported and test printed, Micro Gundam Model kit. More info here : https://cults3d.com/en/3d-model/game/msa-0011-ext-ex-s-gundam-artifact-scale Or…
Scroll Down for Assembly Instructions Purpose This set of models is the result of testing to help reduce VFA (Vertical Fine Artifacts) coming from the misalignment of the Y axis belt on the MK4. As originally designed, many of the parts…
Printing the base For printing, download base1.stl and base2.stl. The model can be joined using 1.75mm filament as pins. I recommend a translucent dark orange filament. However orange or dark red work too. Making the tiles (in metal) To…
Model doporučuji tisknout z průhledného materiálu (PETG funguje skvěle) protože je uvnitř prostor pro vložení osvětlení & vypadá to cool. Ideální je nastavení pro detailní tisk, ale kdo nemá celý týden čas na tištění tak trochou brusného…
This artifact model is ripped straight from the game. It has been split into 4 parts, and I have indicated my recommend orientation for all the pieces. I have also included the full model if you want to cut or condition it yourself. Fair…
DEPRECIATED: I have a new page for a complete redesign of the Y axis belt components for the MK that better accomplishes what this model can't do alone: MK4 Y Axis Overhaul - Reduce Vertical Artifacts on Your Y Axis by KyleTW | Download…
This is a model from the game Crimson Desert. A sealed artifact from The Abyss. Which I recreated with the same engravings. I made two variants, one with smooth edges on all the engravings, the other is sharp (in the pictures it's the…
This is my version of a Compass artifact seen in S.T.A.L.K.E.R. series. It consists of several parts that can be easily assembled and mounted with LED lights. Personally, I find this artifact to be much nicer with transparent tubes rather…
A Christmas decoration to make Shadowheart happy!!!
A quick modification I made to the stock idler mount for the Y axis that helps keep the idler perfectly horizontal and aligned to the belt by using two alignment tabs on the top on bottom of the part. These take up the slack that can…
Artifact 88 — “A lost data relic from the pre-digital age. Contained within: unknown recordings from The Core.”
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Designed to effectively intake this year's game element, The Artifact Intake includes a variety of parts that work together to create an all-around solution for your intaking needs. Each piece can be used on its own, together, or paired…
Hi, I've made a simple design for the Heroes of Might and Magic III - The Board Game to hold the three main decks for the play sessions. It was designed to fit all cards from all expansions with sleeves. I used mouse brim at corners to…
I tried recreating the misterious artifact appearing in the game, to match as best as possible the game logo when seen in wireframe mode. I think completely matching the logo is impossible, because it is an impossible figure (like the…
Organizer for the boardgame The Vale of Eternity compatible with the Artifacts expansion. It uses the original cardboard insert to consume less material while keeping everything perfectly organized. It is not compatible with sleeved card…
artifact from the game stalker2
Overview Artifact of Sun - you have to join two pieces of artifact together to wield great power. Printing I printed it with 0,4 nozzle, 0,2 mm layer height but if you want smooth surface set layer height as low as possible. Colors: Black…
If you are using one of the inexpensive 3D scanners like the POP/POP2. They have a Feature scanning mode that uses the uniqueness of the object to stitch the individual frame scans into a full 3D model. Unfortunately, it will not work…
This is my take on the Compass artifact, mainly known from S.T.A.L.K.E.R.: Clear Sky . I designed this with two goals in mind: making it look game-accurate and allowing it to actually glow on your desk. The model is designed to be printed…
This is the rough shape of the Regen Artifact from Into The Radius. I don't think its 100% right, but looks similar. I'm planning on printing a multi-color version to have some of the dark edges from the game and will update if it works…
A sculpture of elvish design. Elegant curves and articulated supports highlight this piece. Since it is hollow it could be used as a lamp. Please "like" this file if you collect or download it. Instructions The test print in the photos…
CAN YOUR PRINTER PRINT IT? ARE YOU READY TO RISK 10g OF FILAMENT TO FIND OUT? :D No supports besides brim allowed :D Happy printing!
I wanted to make a set of artifacts from the Zone but I am lazy as hell so I made the simplest one possible. It's just a sphere cut in half, with pegs and several color changes. It looks like the original Weird Ball artifact from Stalker…
This is a 3D fractal sculpture with a distinctly organic look and feel. In your mind's eye it could be an exotic shell from unexplored seas, a mysterious magical talisman...or maybe it's just an interesting chunk of eye-candy. :) Feathery…
This is a 3D fractal sculpture. Although it was created using some fairly simple math, it has a distinctly organic look and feel. In your mind's eye it could be an alien fossil discovered while trekking on a distant world, a curious…
People constantly ask if one 3D Scanner is better than another. Users can often look at two 3D scans and say which one has better detail. Unfortunately vendors don't typically show how they get their Accuracy and Resolution…
The Artifact from the sci-fi survival horror game SIGNALIS. SIGartifact and SIGartifactHollow are 20cm across. SIGartifactSmall and SIGartifactSmallHollow are 6cm across.
This is a 3D fractal sculpture. Although it was created using some fairly simple math, it has a distinctly organic look and feel. In your mind's eye it could be an exotic shell found on the beach of an off-planet paradise...or maybe it's…
Star Wars Dark Forces Jedi / Sith Artifact
In board game Stationfall there is only a token for a artifact. This artifact looks like that one on that token. Useful when you have 3D figures for this game. I attach 2 print files which are same files, but only different Prusa printer.…
By the time I finished the model, I didn't have time to print before entering it into the contest! :D Sorry. I was unable to figure out how to make the supports solid with infill. I'm not sure there is a way to do that in the Prusa…
Designed to effectively launched this year’s elements, The Artifact Launcher is a complete assembly that has the power to clear the field. The Artifact Launcher features a servo-powered push arm, adjustable motor mounts for compression…
I printed the knob from clear red resin on my creality ld-002r. Used basic resin printing settings. Sliced using Chitubox
This is a ring with diamond-shaped holes in it. Why is it special? Because it is the first ring we printed on the RepRap printer back in the day. It predates even the Mighty RepRap Power Ring. It was made to demonstrate that holes without…
This is my take on the Assassins Creed Liberation Artifact. It's made as 2 main parts and a locket to trigger the center switch. In this case, I poured a clear green resin into the recesses.
A small half-ball version of the FTC Decode 2025-2026 season's artifact. It's just the original model provided by FIRST but sliced in half with a base suitable for mounting on a 3.5"x5" acrylic frame.
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Easy print using three colors (blue, yellow and red). The parts can be assembled using 5x5 mm round magnets or glue/double sided tape. These are the magnets I used:…
This is a small, purpose-built diagnostic test model created to reproduce a repeatable bridge-related surface artifact observed on a Prusa CORE One. The model is intentionally simple and minimal. It is not meant as a functional or…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
A test artifact for Direct Laser Writing, fs-LDW, MPA or whatever you want to call the technique where you can print with a resolution down to 100 nanometers. The model is actually something like a benchy but for printers that can create…
We saw lots of videos of students placing their hands near the intake to load balls. Flywheels + hands do not mix well (we like to give our teammates a hand, but not in that way). This is a simple wand to hold a ball and safely introduce…
Box organizer for the Ryan Laukat game Artifacts, Inc. This does create a snug fit in the box, and allows for much quicker setup as well as vertical storage. The complete set includes: 5x ArtifactsIncBoxes 1x ArtifactsIncMoneyBox 1x…
Insert/Organizer for The Artemis Project board game, including the Satellites & Commanders expansion, the Directives mini-expansion, the Alien Artifact mini-expansion, and several promo Expedition cards (Remixed from LeafThief's "The…
Three 3D artifact tokens for Magic: the Gathering in a single set — drop-in replacements for the flimsy cardboard punch-outs you lose under the table. Each is a real little object that reads instantly across the battlefield: Food — a…
This is one of the "Tiller" machines discovered on Ilus from The Expanse. The Expanse is by far one of the best Sci-fi/Sci-fact series and my favorite of all. This is a Tiller machine from the planet Ilus. There are (2) of them here, each…
A collection of d20s with their 20 faces replaced by symbols. This is the first part of the collection focusing on symbols related weapons, equipment and other objects. The dice are approximately 35x35x35 mm, with markings 0.4mm inset. I…
The Titanium Actuator Lvl 4 artifact from the game Egg Inc.
The Titanium Actuator Level 3 artifact from the game Egg Inc.
This minimal insert was designed for the Game Trayz insert included in the Euphoria Essential Edition to better hold the smaller artifact cards from the essential edition. I'm not 100% sure that it is the exact same insert as the…
Replica in the style of Amalish bull vessels (Rythons) found in northern Iran from about 3000 years ago. All are pretty whimsical and a bit derpy, I recommend checking out historical examples. Prints about 150mm long at default. Like…
📜 Entry from the Artifact Forge. Object B-9758 found in the techno-relic sector. Purpose unknown... 🔖 Artifact name: Artifact B-9758: House for MR83ZZ 🧾 About the artifact: Chaos has broken out in the workshop: small MR83ZZ bearings (8×3…
Designed to effectively launched this year’s elements, The Artifact Launcher is a complete assembly that has the power to clear the field. The Artifact Launcher features a servo-powered push arm, adjustable motor mounts for compression…
This is a small, purpose-built diagnostic test model created to reproduce a repeatable bridge-related surface artifact observed on a Prusa CORE One. The model is intentionally simple and minimal. It is not meant as a functional or…
The Titanium Actuator Level 3 artifact from the game Egg Inc.
The Titanium Actuator Lvl 4 artifact from the game Egg Inc.
This is a model from the game Crimson Desert. A sealed artifact from The Abyss. Which I recreated with the same engravings. I made two variants, one with smooth edges on all the engravings, the other is sharp (in the pictures it's the…
A small half-ball version of the FTC Decode 2025-2026 season's artifact. It's just the original model provided by FIRST but sliced in half with a base suitable for mounting on a 3.5"x5" acrylic frame.
CAN YOUR PRINTER PRINT IT? ARE YOU READY TO RISK 10g OF FILAMENT TO FIND OUT? :D No supports besides brim allowed :D Happy printing!
I printed the knob from clear red resin on my creality ld-002r. Used basic resin printing settings. Sliced using Chitubox
Artifact Overview This compact artifact occupies a build volume of roughly 40 × 39 × 40 mm (x, y, z), with a total solid volume of about 25 cm³. It includes: • Geometric features (thin walls, pins, holes, lattice structures, angled…
Very simple, print 2. Default infill worked fine. I placed the 6 cards on top as kind of a lid. This is sized for paladin sleeves, it should work if you don't sleeve, might only need one though I've not tested that.
Bring a small piece of Rick's garage to your collection! This stylized skull is inspired by one of the background props
Saw the artifact and no fix yet, so I modified the model in Fusion360 and removed the artifact. Credit to GavBro for the model.
Maybe I've been spending too much time down the UFO/UAP youtube rabbit hole…… Ive designed the model to be printed as is, so it is hollow(2.5mm wall thickness) with the inside not following the contours of the heads and pyramids. I would…
A 3D fractal object pulled from the Mandelverse and prepped for printing. Originally used in my video game called Crashed Lander as a landscaping item. Might be a rock, might be an alien fungus. :) Print Settings Notes: I had luck…
Prints with supports. Bottom is not flat but designed so the item will stand.
This is a plastic coaster. All quality is of .2 layer height. This objects menaces with spikes of plastic. On this item is an image of a Dwarf. The Dwarf appears to be smiling. This relates to the fandom of the game Dwarf Fortress. There…
![MSA-0011 [Ext] Ex-S Gundam [Artifact Scale] [Free]](https://media.printables.com/media/prints/529483/images/4276285_70782fe4-78cf-4f7f-9adf-d5b4025016b8/01.jpg)
