The Quantum Separator
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Yet another fidget slider with my twist on it.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 8
- Makes
- 0
- Views
- 113
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution
This is my simple, pocket-friendly take on the classic magnetic fidget slider. It provides a highly satisfying tactile and audible click-clack feeling, perfect for focus or stress relief.
It prints in two parts and requires standard 6x2mm cylindrical magnets for assembly.
🖨 Print Settings
| Setting | Value |
|---|---|
| Layer Height | 0.2 mm (Critical for magnet fit and tolerances) |
| Nozzle Diameter | 0.4 mm |
| Infill | 15% - 20%(You can try to print it solid for a better feel) |
| Supports | None Required |
| Material | PLA |
🛠 Required Components (Magnets)
The design allows for two options:
Low Resistance: Use 5 magnets and populate just one column.
High Resistance/Loud Click: Use 10 magnets and populate both columns.
Magnet Size: 6mm x 2mm cylindrical neodymium magnets.
Adhesive: Super glue or epoxy.
📐 Assembly Note
CRITICAL: When gluing in the magnets, ensure the polarities are matched so the 2 pieces attract each other.