Counting matching models…
This is a enclosure designed for the CYD NM RF Hat (commonly used with the Cheap Yellow Display). The case protects the electronics while keeping full access to the screen, antennas, and connectors. The lid is secured using 6×2 mm magnets…
I added support for 6x3mm & 6x2mm Magnets. If you change the parameter in the original fusion file, the shape changes. I used the Push/Drag tool to change the hole for the magnets, to keep the shape of the model. Please leave a like ❤, if…
Loved the idea of a magnet slug but the smallest magnets I had were 6x2mm. This remix fits a 6x2mm round magnet perfectly, just need a drop of glue to make sure it stays in place
I put in magnets to work with them on vertical surfaces. Print as desired, looks best with a filament change.
Updated version here! Magnetic fidget slider with satisfying haptic feedback and click. The convex shape and debossed clover leaves ensure a comfortable grip for easy manipulation without causing hand fatigue. Small size makes this lucky…
This is a remix of the Core One Snap Rivet Remover with magnets by Magmabow. Following original tolerances, I enlarged the internal diameters from 4x2mm to 6x2mm to accommodate the size of magnets used in the Gridfinity system
Requires six 6x2mm magnets Refer to https://www.ifixit.com/Guide/Logitech+C920+Webcam+Disassembly/115077 to disassemble webcam to replace with mount In order to guide the USB cable from the top down you will need to disassemble the frame…
After printing about a dozen of my earlier revision I decided to improve this by capturing the magnets inside the print. Now there is a pause at 2.6mm to insert the five magnets. This way there is no gluing or pressing magnets into place…
Hello! Found Stefan's model for Core One nozzle storage, and wanted to print it myself. The only problem, I've got cylindrical magnets! So I modified it for my magnets, and Stefan replied to my make saying I should share it. So here it…
This is a remix of the Core One Purge/Trash Bin originally created by @nicohirsch . Based on the file “ Purge Bin Flat 3mm Bottom.stl” , this version includes holes for 6mm x 2mm round magnets, allowing for secure attachment to the…
Printsettings: Printable without supports. Since the holes are designed to provide a simple pressfit for 6x2mm magnets filament flow needs to be calibrated. Otherwise you maybe need to print the model scaled up or down by around .1 to 1…
Core One Purge Bin with Nozzle Wiper Clearance Remix - 6x2MM Embedded Magnets. No glue needed due to layer pause.
Updated the magnet positions to reflect where the button actually is so that the attraction is much stronger and it is much less likely to fall out now. Using the common 6x2mm size magnets with a little bit of extra tolerance similar to…
Just a remix of the awesome whiteboard marker holder by awei. I've added 9 holes for 6x2mm neodymium magnets instead of the original magnet tape.
This is a remix of the awesome model by @ed
See https://www.printables.com/model/382058-bambu-ams-disconnect-tool This is a combination tool to help disconnect the PTFE tube and the AMS cable. This remix has 6x2mm magnet holes instead of the original 6x3mm magnet holes and no text.
Print Settings Infill: 15% Supports: None Material: PETG Brim: Recommended I also recommend getting 2xShort M3 socket head cap screws so it aligns and holds the purge bin in place
If, like me, you have an FDM 3D printer, then you may well have heard of Gridfinity. Therefore, like me, you may well have an awful lot of 6x2mm magnets lying around that are slightly too shallow to make full contact with GW bases. These…
Remix for 6x2mm magnets
Remix with 6x2mm magnet (Pressure Fitted). Text is extruded for better coloring
This 3D printable model helps you stay organized when using the Prusa MMU3 Community version or INDX. It consists of a compact base attached to metal base with magnets and a set of small color blocks that you can print in the same colors…
A sleek remix of the threaded version without the handles and tabs. This makes the top cover nice and minimalistic.
A remix from Buck Converter Box (LM2596) by LDG92, open ends without rail mount. Customized specifically for CR10S Pro. The original mount box design is already snap fit/screw free, I just added two mount holes for 6x2mm magnet , so that…
remixed this model to accept magnets that I had on hand so I wouldn't have to buy additional magnets just for this.
This is a modified version of a 3D model that uses the same magnets as the original. I redesigned it to hide the magnets for a cleaner look. No glue required. Note: Make sure to pause the print at layer 2.60 to insert the magnets. The…
The magnetic holding strength is significantly weaker than using the stock bases as standoffs. I recommend using a stock base for the top and bottom of your stacks.
Remix of Honeycomb Alpha/Bravo Underdesk Quick Mount with magnets instead of friction fit
Rivet extraction tool with spot for 2x 6x2mm press fit magnets
A plug designed to fit inside a 16x2mm multilayer/alupex pipe (e.g. henco, waving tigris) and used for guiding/pulling the pipe through hard to reach spaces. Keeps out dirt and allows for a bolt or screw (4mm hole diameter) to be inserted…
I liked what Shulhi Sapli made but didn't have the magnets required for this. I already had 6x2mm magnets laying around so I ordered the holders required from aliexpress, and updated the 3d file to use 6x2mm magnets. Honesly works pretty…
A remix of the “8-Bit Game Over Fridge Magnet” (medium version) with an updated magnet configuration. This version replaces the original 12x3 mm magnet with two 6x2 mm neodymium magnets (0.24x0.08 in), making it easier to find compatible…
A simple No ads sign with inprinted 6x2mm magnets with the font Sweden Sans. I have added the font-pack if you want to change the text.
Remix with 4 magnets in with the 6x2mm dimensions. Printed with PLA 25% infill. Reduced overhang speed to get best results.
a swedish “EJ REKLAM” (no advertising) with built in magnets. I have added font-pack with Sweden Sans.
Large is aprox. 45mm in center dia Basic is aprox. 21mm in center dia Both have 2.5mm lips on the end to hold spool in place so the hole in your spools need to be at least 5mm larger than the center Dia. Two spool spindles for filament ..…
Same as the original, just with M3 holes and 6x2mm magnet holes. I merely enlarged all the holes by 1mm diameter (keeping the 'step down' so the screws ‘bite’), and changed the 10x3mm hole to a 6x2mm one; otherwise the case is exactly the…
This is a remix of the Core One Snap Rivet Remover with magnets by Magmabow. Following original tolerances, I enlarged the internal diameters from 4x2mm to 6x2mm to accommodate the size of magnets used in the Gridfinity system
README Print Instructions Space the both parts far enough away if printed together to make sure the magnets don't accidentally jump out of the holes. (Shouldn't be the case if you have a magnetic build plate) Absolutely make sure to stop…
This is a enclosure designed for the CYD NM RF Hat (commonly used with the Cheap Yellow Display). The case protects the electronics while keeping full access to the screen, antennas, and connectors. The lid is secured using 6×2 mm magnets…
A remix of the “8-Bit Game Over Fridge Magnet” (medium version) with an updated magnet configuration. This version replaces the original 12x3 mm magnet with two 6x2 mm neodymium magnets (0.24x0.08 in), making it easier to find compatible…
I added support for 6x3mm & 6x2mm Magnets. If you change the parameter in the original fusion file, the shape changes. I used the Push/Drag tool to change the hole for the magnets, to keep the shape of the model. Please leave a like ❤, if…
you have to print two parts. I made different designs where you can choose from. The magnets have to be glued in. I hope you like my designes
All credit to @duawt the OG designer, seriously, I barely did anything. The negative cylinders that I added are 6.5x6.5x3mm for a little tolerance, so you're probably gonna need some glue. *I will try and remember to add a photo of the…
Format: Length: 40mm Width: 20mm Height: 5.5mm Recommended text height: 2mm Required magnet size: 6mm by 2mm Placing the text: The text can be placed with any slicer but you find examples in the .3mf file. If you want the text to be on…
Requires three 20x6x2mm magnets Print in PETG
Remix of SBFI to use 6x2mm magnets instead of 6x3mm. With added 0.4mm chamfer on magnet holes to ease magnet insertion.
A simple magnetic fidget using 6 cylindrical magnets of 6x2mm. Put them 5 in the same orientation in the base and 1 in the opposite orientation in the slider (so that it’s attracted by the 5 others). Add some candle wax before closing the…
Prusa Core One Purge Bin (for two 20x6x2mm magnets)
README Print Instructions Space the both parts far enough away if printed together to make sure the magnets don't accidentally jump out of the holes. (Shouldn't be the case if you have a magnetic build plate) Absolutely make sure to stop…
Remixed from the 1080p usb webcam upgrade made by @RobertSamples_345778 . Changed the magnet holes at the rear to 6x2mm. **Original camera was no longer available, i purchased this webcam on Amazon and it fit perfectly**…
Draft loading schedule for the company's warehouses Each city has its own color combination, and each store has its own number. Each car is printed with two colors of plastic, with a pause after layer 16 (0.2 mm layer height) between…
A simple magnetic cable bracket. Uses two 6mm diameter 2mm height magnets, found cheaply on AliExpress or Amazon. The size in the name is the exterior width. Dimensions are 8xWIDTHx8mm.
A compact resin-printed sliding switch designed to work with 6 × 2 mm magnets . The slider features a smooth, rounded shape and an integrated sliding cap for easy operation. Two cylindrical magnets are embedded inside the body, providing…
Modified version of the magnetic insert for the Hex Scrapper with a slot for the magnet (6x2mm). It has a slide-in slot for the magnet and a flange to keep it level with Hex Scrapper. The slot is pass-through allowing to push in and out…
This is a custom "Corey♡" name tag designed specifically to mount to the top bar of the Prusa Core One (+/L). It features two built-in recesses on the back designed to fit standard 6mm x 2mm neodymium magnets for a easily removable…
INFO Extruded circle in the center and made space to fit 6x2mm magnets. Also, little touch up. Rounded the sharp edges and added chamfer. PRINT SETTINGS 0.2mm layer height Add pause print to fit the magnet then resume printing. Tolerance…
Love the OG design but the 6x2 magnets I have laying around didn't have enough strength slid into the slot side by side so I designed this to be able to stack 2-3 magnets for increased strength. It didn’t really make a strength difference…
Remixed the model for 6x2mm magnets and added text for material type for easy color and material identification.
I followed https://www.youtube.com/watch?v=0Sla-vIsvh4 to add a colored inlay to the model: Arrange both models in your slicer so that the inlay fills the void in the top Slice and print just the inlay. You might want to tweak your slicer…
This is a brush case making use of the 20x6x2mm magnets that are supplied with the Prusa MK3 printers… It's a case that holds 9 paint brushes, so you can take them with you when you are going out painting…It closes and locks with magnets…
REMIX of NexPrints model for 6x2mm magnets
I made this little model to check the hole size needed to properly fit a 6x2mm magnet so I can properly model holes in future designs. The magnets I have on hand are from Amazon . The holes start with true to size in the direct center,…
Printed in PETG with a pause at layer 14 - 0.2mm layer height, 0.4mm nozzle. Printed a Bambu P1P
Lately I have been using a lot of 6x2mm magnets for Gridfinity storage solutions as well as designing some electronic control housings with removeable lids. I wanted a quick tolerance test to see whether my CAD designs should have 0mm…
@KevinV_460266's Poop Chute but with a better fit for 6x2mm magnets and less of a wall around the side.
I added beveled holes on the bottom of each paint spot to allow for stacking.
you have to print two parts. I made different designs where you can choose from. The magnets have to be glued in. I hope you like my designes
I loved the original design by Phantom Smithy, tho for me it was missing magnet holes. I asked for a STEP file, which he kindly uploaded, and added the holes. The holes are designed with a diameter of 6.12mm. For me that was just right…
Minimal Chess Set - Board remix A remix of the board segmet of the excellent Minimal Chess Set here: https://www.printables.com/model/878156-minimal-chess-set All the pieces and other parts you'll need to grab from the original maker,…
This is an Oral B cap that uses 2 6x2mm magnets to keep the cap closed.
EvilSpyBoys model remixed to support 6x2mm magnets instead of 10x3mm.
