The Quantum Separator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Yet another fidget slider with my twist on it.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 113
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
This is my simple, pocket-friendly take on the classic magnetic fidget slider. It provides a highly satisfying tactile and audible click-clack feeling, perfect for focus or stress relief.
It prints in two parts and requires standard 6x2mm cylindrical magnets for assembly.
🖨 Print Settings
| Setting | Value |
|---|---|
| Layer Height | 0.2 mm (Critical for magnet fit and tolerances) |
| Nozzle Diameter | 0.4 mm |
| Infill | 15% - 20%(You can try to print it solid for a better feel) |
| Supports | None Required |
| Material | PLA |
🛠 Required Components (Magnets)
The design allows for two options:
Low Resistance: Use 5 magnets and populate just one column.
High Resistance/Loud Click: Use 10 magnets and populate both columns.
Magnet Size: 6mm x 2mm cylindrical neodymium magnets.
Adhesive: Super glue or epoxy.
📐 Assembly Note
CRITICAL: When gluing in the magnets, ensure the polarities are matched so the 2 pieces attract each other.