Modular tape holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A modular tape holder using multiboard multipoint to allow stacking multiple tapes
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 19
- Makes
- 0
- Views
- 281
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
✨ Overview
This is a robust, space-saving Print-in-Place tape dispenser and organizer designed to keep your most-used tapes right where you need them. It seamlessly integrates with the popular Multiboard System using the Multipoint Connection and is fully parameterized to allow users to customize the tape sizes.
Print it, snap it on the board, and start organizing—no assembly or extra hardware required!
🔑 Key Features
Customizable Dimensions: Includes the F3D (Fusion 360) source file which is fully parameterized. Users can easily open the file and adjust the parameters (like the tape width and diameter) to fit any size of tape roll they own.
Multiboard Ready: Attaches securely using the Multipoint mechanism, allowing for easy slide-on/slide-off installation while maintaining a strong, stable hold.
Stackable Design: The unit is designed to be stacked vertically, letting you maximize vertical storage on your Multiboard panel.
Print-in-Place (PiP): No supports, no glue, and no assembly is needed. The model prints as a single piece, ready to use immediately off the build plate.
Dual Tape Capacity (Default): The included 3MF/STL files are configured for two common tape roll sizes:
One holder for standard 50mm (~2 inch) tapes.
One holder for standard 20mm (~0.75 inch) tapes.
📐 Print Settings & Statistics (For Default Size)
| Setting | Recommended Value | Note |
|---|---|---|
| Layer Height | Default (Typically 0.20mm) | Crucial for successful Print-in-Place hinges. |
| Infill | 15% | Provides strength for workshop use. |
| Supports | None | Print-in-Place design handles overhangs. |
| Material | PLA (or PETG for added durability) | |
| Printing Time (1 Unit) | 1 hour 17 minutes | |
| Filament Used (1 Unit) | 22.78 g / 7.64 m |
📂 Included Files
The listing includes the following files:
F3D (Fusion 360 Source File): Recommended for customization. Allows you to adjust the tape size parameters.
3MF: Contains the model and optimized print settings for a seamless experience.
Note: For remixing, the multiboard system ofers components for multipoint connection that can be incorporated simply in any design for connection points