Search results: multipoint

Counting matching models…

PrintablesB20bob

Multibin - Multipoint 3x5 Notepad Holder

Holds a 3x5" notepad and pen comfortably. I used 4 multipoints so it doesn't wiggle around.

Downloads: 29
Likes: 10
Rating: 5

Order a print of this model

PrintablesVee

iFixIt Moray Multiboard (Multipoint) mount

Wanted to mount my screwdriver set to my wall, so I did. and now you can too :)

Downloads: 23
Likes: 1
Rating: 0

Order a print of this model

PrintablesBronzeCycle

Multiboard multipoint rail peg

I wanted a efficient way to store my sockets on my Multiboard wall, so I designed a simple customizable peg for Multipoint rails There are files ready for ½", 3/8", and ¼" inch sockets, but the provided FreeCAD file can be used to create…

Downloads: 15
Likes: 2
Rating: 0

Order a print of this model

PrintablesRoboMagus

Twistlock Multipoint Snap

A low profile version of the original Multiboard Snap - Twist-On Multipoint Mount. Can be used to mount Multipoint accessoires flush to your Multiboard.

Downloads: 11
Likes: 1
Rating: 0

Order a print of this model

Printables

DJI Osmo Pocket 3 Magnetic Base with Multipoint Rail

This is a magnetic holder for the DJI OSMO Pocket 3 gimbal camera. I started out with Chrizzl's design , but as I did not have any square magnets in stock I decided to modify his design. I therefore changed the bottom to take ten 8x3…

Order a print of this model

Printables

Klippt for OpenGrid / multipoint on OpenGrid

Multiboard created a cross piece for Klippt using this piece with multipoint to use Klippt on their board. I am using OpenGrid and I wanted to use Klippt, so I made these pieces. David D already has multiboard compatibility snaps, but not…

Order a print of this model

Printables

iFixIt Moray Multiboard (Multipoint) mount

Wanted to mount my screwdriver set to my wall, so I did. and now you can too :)

Order a print of this model

Printables

Multipoint to Multiconnect adapter

Since multiboard has released multipoint there are now two different, but very similar systems: Multiconnect and multipoint. As multiconnect was released several months earlier (beginning of 2024 compared to August) there are many models…

Order a print of this model

Printables

Omnifixo Box with multipoint mounting holes

The modified Omnifixo field box by Xkonti is a very nice printability improvement to the original case. But the case is still aimed for carrying with you. Since my Omnifixo mostly just stays at my desk and I want it out of the way when…

Order a print of this model

Printables

MagSafe - Multiboard/Multipoint

A MagSafe adapter for the multiboard system Uses “multipoint” connection points to secure the charger to the board. I suggest using 2 of the “Flush Big Thread” multipoints Sorry about the restrictive license, I can't do much about that…

Order a print of this model

Printables

Parametric Multiboard/Multipoint Hooked Peg

Multiboard/Multipoint “hooked” pegs. Used as a hooked platform to hold items to the board. Images show variables and default values. Both push-fit and bolt-locked available. Credits to Jonathan (YouTube: @Keep-Making , @multiboard_io )…

Order a print of this model

Printables

Plastic Razor Blade Dispenser for Multiboard (Lite Multipoint Rail)

A Dispenser for plastic razor blades. (40x18.5x1.8mm³). Remixed to use Lite Multipoint Rail for easier printing and more versatile connection options. For supports, you only need snug supports on the front overhang, I suggest that you use…

Order a print of this model

Printables

Bosch Gluey Multipoint Holder

A simple upgraded version of David Holečko's Bosch Gluey wall holder. I just did a quick and dirty fill of the screw holes and added a Multipoint rail slot on the back, for use with Multipoint rails and Multiboards. In the first picture…

Order a print of this model

Printables

Multiboard Cylinder with Honeycomb Pattern, Multipoint attachments

This is a remix of the excellent Multiboard parametric files by sjcundy . Unfortunately, I don't know how to make the changes I made and keep the model parametric, but per request, I've uploaded the files here that I created using his…

Order a print of this model

Printables

Bosch Gluey Glue Stick Multipoint Dispenser

A simple glue stick dispenser for the Bosch Gluey 7x20 mm ministick glue sticks. Has two columns in case you want to store two different colors separately. Original file includes a simple lid, which is kinda lose, so there's version two…

Order a print of this model

Printables

Multiboard bottle holders with Multipoint connector rails

Multiboard bottle holders in sizes from 20mm to 150mm. The flask / bottle holders uses the Multipoint connectors. Use one of the many connector types to mount the bottle holders to the Multiboard . The bottle holders has the same OXO rail…

Order a print of this model

Printables

Threaded MultiPoint (Slotted) Installation and Removal Tool for MultiBoard

A tool designed specifically for installation and removal of any threaded MultiPoint with Slots for MultiBoard. This includes a Snap-mounted holder which fits the tool nicely and allows neat storage of the tool on your MultiBoard. Print…

Order a print of this model

Printables

Multiboard Multipoint Driver Holder (Fabreeko)

Compact storage / display solution for your nice Fabreeko Driver set. Will probably work for other generic sets too. Print standing upright, you shouldn't need supports. Depending on your bed adhesion, a brim may be helpful.

Order a print of this model

Printables

Multipoint Rail Glue Stick Holder

A simple remix of Gadreel's Multiboard Gluestick Tray . I removed the T-bolt screw hole, added a Multipoint rail slot, and filleted the exterior edges. Designed for BambuLab's glue sticks, but may also fit others.

Order a print of this model

Printables

Desolder Pump Holder (Lite Multipoint Rail)

A Multiboard holder for a desolder pump. This holder is taller than others I've seen, but I wanted a Lite Multirail slot on the back and a firmer hold of the body, so I designed this. Designed around a pump with a ~20 mm diameter body and…

Order a print of this model

Printables

Desolder Pump Holder (Multipoint Rail)

A Multiboard holder for a desolder pump. This holder is taller than others I've seen, but has a Multirail slot on the back and a firmer hold of the body, so I designed this. Designed around a pump with a ~20 mm diameter body and a 7.2 mm…

Order a print of this model

Printables

Ryobi USB Screwdriver Multiboard Holder multipoint ver.

I edit it for multipoint.

Order a print of this model

Printables

Lite Multipoint Rail Glue Stick Holder

Simple Multiboard glue stick holder. Updated the design with a Lite Multirail slot on the back so that the holder can be locked in.

Order a print of this model

Printables

Dewalt battery holder for Multiboard/Multipoint

Easy print with standard Multiboard settings - 3 shells, 15% infill, no supports. If printing on a bedslinger, recommend aligning part along the Y-axis to minimise wobble. Slides onto any Multipoint rail; I use https://than.gs/m/1123315

Order a print of this model

Printables

Multipoint Scraper Holder and Blade Dispenser

print backside down, snug normal supports on automatic .2 layer hight i used ABS, you do NOT have to all other settings up to you really, as far as infil, layer width walls and surface layers, etc i personally use a pegboard style…

Order a print of this model

Printables

Multipoint/ Multiboard Compatible Phone Holder

This is a simple phone mount which is compatible with Multiboard. It incorporates a Multipoint rail slot into the design meaning it should be compatible with both Rail pop-ins and lite multipoints. It was designed to fit my phone in it's…

Order a print of this model

Printables

DJI Osmo Pocket 3 Magnetic Base with Multipoint Rail

Order a print of this model

Printables

Roto multipoint casement latch lock-bar retainer

There's a series of plastic pieces that hold the lock bar on the casement windows in my house to the window frame, and some were broken. I got out my calipers and made a replacement. I haven't been able to track down the model number of…

Order a print of this model

Printables

8Bitdo Ultimate Shelf for Multiboard Multipoint

Printed in PLA, 3 walls, 15% infill of your choice 0.2mm layers, same as recommended parts for multiboard.

Order a print of this model

Printables

Multiboard Honeycomb Screwdriver Holder With Threads for Multipoint Screws

A screw driver holder, in honeycomb pattern, for your multiboard with Threads for Multipoint Screws.

Order a print of this model

Printables

iPhone 6s / 6 Holder for Multiboard Multipoint

Why an iPhone 6s, in 2025? A phone that's just about to turn 10 years old ? Simple: AirTags! I'm a dedicated Android user, but there's no denying that AirTags (and other Find My compatible trackers) are the best low-cost trackers on the…

Order a print of this model

Printables

Dies for adding MultiPoint to your STL files.

A collection of negative space dies for converting STL files to use the MultiPoint system. Simply import into your slicer as negative space and add to the rear, vertical side of your STL. (Narrow side out, of course.) Labeled as…

Order a print of this model

Printables

25mm Dropper Bottle Holder for Multiboard using Multipoint

Designed to hold six 25mm dropper bottles (Vallejo, The Army Painter and more) on Multiboard with the help of Multipoints. There are two files “odd” and “even” that are staggered so you can see the labels of bottles behind. It's also…

Order a print of this model

Printables

HP G4 Thunderbolt Dock Multiboard Multipoint Mount

I needed a way to mount my HP Thunderbolt G4 docking station under my desk, and wanted to make use of the Multiboard that I have underneath my desk. Place your multipoints in the multiboard, (1 will technically work, but I use 4) and then…

Order a print of this model

Printables

Headphone Holder for Multiboard and Multipoint

This model is designed to mount to multiboard tiles using the existing multipoint screws. Printing instructions 2 perimeters minimum (3 perimeters shown) 5% infill any material Multiboard- https://www.multiboard.io/ Multipoint download on…

Order a print of this model

Printables

Tuya Temperature and Humidity Sensor Multipoint Bracket

Print in the orientation of the 3MF file, or the small pegs will snap. I printed in PETG and used support, which was a bit hard to remove. Print a Multipoint to hook it onto a Multiboard wall.

Order a print of this model

Printables

Multiboard Multipoint One Piece Flush Big Thread Lite

I love Multiboard and am using it everywhere for vertical organization. However, the Multipoint with hinge design kept breaking when I tried to fold them together (see my photo). So I redesigned the Multiboard Multipoint Flush Big Thread…

Order a print of this model

Printables

Bolt Locked Multipoint Hole

Order a print of this model

Printables

MultiPoint variant of the AA-AAA battery holder.

I loved the simple design for the AA-AAA battery holder and decided to hang it on the wall. I added channels to accommodate Multipoint connectors used with the MultiBoard system, so it can easily be mounted to the wall. Prints without…

Order a print of this model

Printables

Multiboard parametric wire spool holder Multiconnect and Multipoint OpenSCAD

Overview This is an OpenSCAD version of Phoenix Knight Design's original 6 spool holder . The original design would not work for me due to my spools being significantly smaller than the ones in the original design. Features Using…

Order a print of this model

Printables

Improved lock bolt collection for multiboard - multipoint - multiconnect

WARNING: I have not used these in a real-world setup yet, but because I think it will be at least a few weeks before I get around to that I wanted to share them now. PLEASE do a test print and see if this works for you before printing in…

Order a print of this model

Printables

Klippt for OpenGrid / multipoint on OpenGrid

Order a print of this model

Printables

Caliper Holder for Multiboard Wall – Small Thread Multipoint Mount

Description: This is a custom-designed Caliper Holder specifically made to be mounted on a Multiboard wall system. It provides a sturdy and convenient storage solution for your caliper, keeping it easily accessible and organized in your…

Order a print of this model

Printables

Wera Hex Plus (Allen Keys) Holder - Multiboard Multipoint

A Multiboard accessory for storing Wera Allen key set. Use Multipoint ( not Multiconnect) to attach this to your Multiboard wall.

Order a print of this model

Printables

Dualshock 4 PS4 Multiboard Multipoint stand

A Multipoint adaptation of the Dualshock 4 controller, that uses 2 multipoint lite - small thread or similar, that is the beauty of multipoint. Another advantage of this way of doing it is, that there is no need for support material It…

Order a print of this model

Printables

multipoint and rail to muscle rack adapter

the one piece is a little broken rn use m3 x 8mm countersunk screws petg or better is recommended

Order a print of this model

Printables

MultiBoard X Multipoint - 2(OX)OI Rail Pop-In

X Multipoint - 2(OX)OI Rail Pop-In

Order a print of this model

Printables

Ryobi Battery Holder For Multiboard (Lite Multipoint Rail)

A mount for Ryobi's 16V battery for Multiboard. Set to hold the battery at 45 degrees “tail up” so that several batteries can be squeeshed together without taking too much surface space.

Order a print of this model

Printables

Rubber Glove Dispenser for Multiboard Multipoint

The internal dimensions are 5 1/16" x 2 5/16" (123.8 x 58.7mm)5 1/16" x 2 5/16" (123.8 x 58.7mm). The specific gloves I use are https://www.amazon.com/dp/B0B1P8GCW6?ref=ppx_pop_dt_b_product_details&th=1 Print as is, 3 perimeters, no…

Order a print of this model

Printables

PS4 Controller Stand Multiboard Multipoint Rail

IMO the best position to print this is with the flat surface under the front lip flat against the build plate. It makes for more support, but the rough finish of the supported surface is better hidden under the model

Order a print of this model

Printables

Multiboard Multipoint Cable Tie Organizer

Attach to your board with four single Multipoints or two Multipoint rails. NOTE: Photos are from an earlier prototype but OrcaSlicer kept crashing when I tried to export. The STL I finally managed to save has slightly shorter Multipoint…

Order a print of this model

Printables

Multiboard/Multipoint Tray Holder

I have a mix of various hanging trays and needed to connect them to my multiboard. A few holders found online but none fit what i needed as they used other attachment styles than the standard multipoint connectors i already have a ton of.…

Order a print of this model

Printables

Threaded Multipoint (Slotted) Installation and Removal Tool for Multiboard

Depending on your printer you may want to scale the model a little larger, the slot is sized to the same measurements of the penny I had on hand so it may be too tight of a fit if your printer isn't dialed in for accuracy.

Order a print of this model

Printables

XTAR VC4 Mount for Multiboard Multipoint

Remixed the model to use the standard multipoints, you can use smal/mid/big thread multipoint to mount the holder (Do not use light multipoint). Original model says it's for XTAR VC4 Plus, confirming it fits VC4 perfectly.

Order a print of this model

Printables

Multiboard bottle supports with Multipoint connector rails

Supports for the Multiboard bottle holders with Multipoint connector rails . I created these because the bottle holders can come loose with too much weight or constant use. These mount upside down relative to the bottle holder and use the…

Order a print of this model

Printables

Bracket for Makita DUB182 mini blower (multiboard rail/multipoint mounted)

This thing is really awkward to hang, the bracket supports the main body avoiding overmoulded parts. It does require glue to fix the cradle to the 2 brackets, you may as well glue the 2 bracket parts together as well. The glue isn't load…

Order a print of this model

Printables

Zircon StudSensor Pro (stud finder) Multiboard mount using Multipoint Rail

This is a Multiboard mount for the Zircon StudSensor Pro LCD. It has a Multirail slot in the back

Order a print of this model

Printables

Round Spraybottle Tray 6cm Light Multipoint / Multiboard

Choose the light fixpoint ( https://multibuild.io/parts/fix-points?category=multiboard ) or any of the light rails ( https://multibuild.io/parts/rails?category=multiboard ) as mounting options.

Order a print of this model

Printables

Comandante Multiboard Mount (Multipoint) (6,3cm tray)

Use regular Multipoint fixpoints ( https://multibuild.io/parts/fix-points?category=multiboard ) or rails ( https://multibuild.io/parts/rails?category=multiboard ) for mounting.

Order a print of this model

Printables

Picopresso Multiboard 2 Multipoint Mount

Use 2 Lite Fixpoints for connection ( https://multibuild.io/parts/fix-points?category=multiboard&Version=Lite%20Fix%20Point )

Order a print of this model

Printables

Smart lock "foot" for Hoppe multipoint latch + Switchbot smartlock

This “foot” for the switchbot smartlock allows it to be placed in the correct position to turn the mortise deadbolt despite the door hardware making fitting a traditional deadbolt type smartlock difficult. Its basically a square with a…

Order a print of this model

Printables

Multipoint Attachment Tool for the Square Infinitely Adjustable Blocking Boards

This tool is used with the infinitely adjustable blocking board. Print the multipointToolForSquareBlockingBoardV5.stl file using PLA. All other parts print using PETG. I also have included the openscad file if you wish to modify the…

Order a print of this model

Printables

Multipoint Attachment Tool for the Round Infinitely Adjustable Blocking Boards

Print the multipointToolForRoundBlockingBoardV5.stl file using PLA. All other parts print using PETG I have included the openscad source in case you want to modify the tool. It is AS-IS and undocumented. To finish after production watch…

Order a print of this model

Printables

Multiboard Vise Grip Wire Stripper (now with Multipoint)

This is a Multiboard hanger for the Vise Grip automatic wire strippers, inspired by “HSW Vise Grip Wire Stripper Hanger” from Tom Nardi.

Order a print of this model