Toolbox Caddy Organizer parametric FreeCAD
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
fully customizable multipurpose storage box/basket/caddy
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 21
- Makes
- 0
- Views
- 125
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Public Domain
Print parameters
- 3 walls (@0.4 nozzle) recommended
- layer height 0.25 or 0.2
- infill 10%
- no supports
- if first layer is inconsistent on your printer consider a small brim for the handle part
- tested with PETG and PLA+
- print orientation as seen in my pictures
How to adjust the model parameters
Open the Toolbox_Vx_FreeCAD.fcstd file in FreeCAD. Doubleclick Spreadsheet in the object tree than adjust the settings for your needs.
This are the possible settings (all values in millimeter):
After adjusting switch back from the spreadsheet-tab to the model-tab.
Select Group_Box in the object tree and goto File → Export… → export as *.step
Load the exported step into your slicer. To adjust, add or remove the dividers you can split the imported step into its underlying objects (PrusaSlicer: rightclick on model → split → to objects).
After the splitting you can manipulate or duplicate the dividers for your likings and than merge the single objects of the box back into a group (merge not needed, but makes it easier for auto-arrange).
Pre exported models
if you struggle with FreeCAD or have not the possibility to use it feel free to ask me to export the needed *.step for you.
This pre-exported models you can find here as well and they have the following naming-pattern:
Toolbox-l220-w100-h50-200.step
→ inner length:220 / inner width:100 / inner height:50 / height including handle:200
Chit chat
this is my very first published model so every feedback, criticism, make and like is highly appreciated!