.2mm to 3.8mm Shims
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Printable 18mm x 18mm shims for whatever. I used them for shimming a rocking toilet on an uneven concrete slab floor.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 69
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
When installing a new toilet it rocked due to the flooring being uneven around the closet ring. I don't like commercial shimming wedges because they take too much work to trim.
These are stepped in .2mm increments from .2mm to 3.8mm. Just find the one that works and break it out of the group and slide it into place until it gives proper support. I put a drop of CA adhesive on the middle of the shim (on the porcelain side) and use a putty knife to push it into proper alignment.
If I need a thicker a shim, they can be stuck together with CA adhesive in a stack, or download and edit the .f3d file to suit your needs.