SuperFlux MK3 Bearing Seals - Simple Print
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bearing seals for the SuperFlux MK3 motors, remixed to remove the need for supports
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 41
- Makes
- 0
- Views
- 160
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Share Alike
Bearing seals for the SuperFlux MK3 motors, remixed to remove the need for supports
Printing Instructions
Print in TPU or another flexible material, laying on the flat edge (the little “lip” overhang should be facing up).
Installation
Grease with marine bearing grease
Be sure to place grease in the u-shape reservoir (filling the reservoir entirely), all the way around. Also lightly grease the innermost ring surface, where it touches the axle.
Install with the u-shaped reservoir facing toward the bearings (the flat face should be facing away from the bearings). See images for further clarification.