SJK electric wax carver wall mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple wall mount for one of the SJK Wax carvers model JO801
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 21
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
This is a wall-mount designed to fit the Dental Electric Wax Carver with Double Pens & 6 Wax Tips sold by the Annhua Store on Amazon. Many similar units use the same housing, so this mount should fit most of them. If your model is slightly different, the design is easy to adjust.
I added pen holders on both sides for easier storage, and everything fits and works as expected once mounted.
Printing notes:
You can print this in any material. I used a raft and supports, but they’re probably not needed. The model is oriented to print on its edge. I used a three-wall perimeter so the mount is mostly solid. The sample shown was printed in PLA-CF only because I ran out of PCTG.