Ender 3 Toothed Pulley Belt tensioner 2GT X axis
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ender style belt tensioner for 2GT toothed pulley. Suit Ender 3v2 or others with same gantry plates.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 14
- Makes
- 0
- Views
- 133
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution
I had a few goes at making a custom tensioner and accidentally arrived at one that matched the original style nicely. This allows the use of a toothed pulley that I think makes for less transmission of belt artifacts into the skin layers.
Recommend print at least in PETG/ASA - though PLA is fine on a fairly stock setup.
The Pulley carriage should probably be printed on its side for strength with a little support for the small overhang.
The main body and knob can print vertically.
I added fuzzy skin coz I like the fuzz.
You'll need a GT2 toothed pulley with M3 hole. 16-18mm m3 bolt, and a M4x25 hex bolt with nut.
Also, a M4x30 if you want to anchor it in place through the existing hole in the 2020 profile.
